The Nissan Path

martyf250

How do I access the light to change the bulbs. Both flickered ad would stay on with a good bang on the tailgate but are out now. The chrome cover seems to be in the way. Thanks

martyf250

yea i normally do oil changes myself but my garage was all junked up....and my wife wonders why i don't trust anyone!

martyf250

I got an oil change about 1,000mi ago. I open the good to put washer fluid in and notice the oil filler cap gone! Oil in engine bay. I checked oil level and seemed normal. Any possible damage that can be done? I calls dealer and they gave me a new cap and supposedly cleaned the oil but did a half as...

martyf250

my light will come on while driving to work at about the same distance on most days. it doesn't blink it just comes on and stays on until i turn the car off and will stay off when restarted.

Any idea what might be wrong? faulty sensor?

martyf250

So i have a new hub assembly from the dealer. My brother who has an 08 wrangler just replaced his ball joints and needed to take his wheel bearing hubs off. On one side broke off 2 of the three bolts that hold it on. I am petrified my car being older that this will happen to me....any ideas to take ...

martyf250

Do you know if the axle nut is a normal or reverse thread?

martyf250

Thanks for the input. I am a big procrastinator and ever since I've hit 65000mi it has been 1 thing after another that needs attention (new brakes, U joint, E brake. i like to do my own work if i can. I picked up the hub at dealer for $159 ($170 with tax). I am waiting to hear back on the vent contr...

martyf250

I have a slight vibration coming from front right and was told by tire shop my front right wheel bearings are shot. I picked up the hub assembly at local dealer. What size nut is used on the rotor and is it reverse thread (left tight, right loose?) any other tricks someone can recommend to make this...

martyf250

i just got 4 new tires and had them check out a noise in the front end. Right front is fried and the left is starting to go. I think the bearings are pressed into the rotors? Anyone know of a write up on how to do this or should ijust take to the shop?

martyf250

2005. my ses light keeps coming on and off and finally has stayed on. I pulled the vent coltrol valve off again and cleaned it out. i could not get it back in with the o-ring on so i caulked it and put it back in. the light bstayed off for 100 miles and then just came back on. is there a way to benc...

martyf250

2005. my ses light keeps coming on and off and finally has stayed on. I pulled the vent coltrol valve off again and cleaned it out. i could not get it back in with the o-ring on so i caulked it and put it back in. the light bstayed off for 100 miles and then just came back on. is there a way to benc...

martyf250

yea...but hard to do but my bolt were rusted on real bad and had to have two people yank on the wrench for a half hour. then just used a hammer and small/ larger sockets to pound in/out the u joint caps. then bolt it all togehter

martyf250

No I havent taken it in yet. I jacked up the entire car and slowly put it in drive to see if we could hear where it was binding, etc. could not determine. my brakes looked ok. the U joint are all new with 10K miles. will probably get it in soon though. the clicking coming from the front when turning...

martyf250

No il not quite sure how to adjust. Are there any write ups anyone might know

martyf250

So im at the ramp with the jetski and engage the parking brake. I let off the brake so the ebrake takes the pressure and not the tranny. Well it keep on rolling. i disengage and then reengage thinking it was a fluke.

Any good ideas on how to address this?

Search found 107 matches

2005 license plate light replacement

Dealer forgot to pull oil cap on!

TPMS light

Hub Assembly replacement

2005 wheel bearing replacement

P0455 Vent control valve

P0455 Vent control valve

worn parking brake?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums