The Nissan Path

HuntingPath · Joined: 01 Feb 2010 Posts: 3

in the bumper? My S model 2006 didn't come with factory fog lamps. I'd very much like to add them but I have some questions. Would it be advisable to install the OEM lights that oridnarily come on Paths or since I'm putting them in anyway, would I better off using an after-market light? Does anyone make after-market lights that fit into the round recessed holes in the bumpers?

Thanks folks! Very Happy

08 pathy · Joined: 30 Dec 2009 Posts: 88 Location: fl

08Datsun · Joined: 15 Jan 2008 Posts: 244 Location: Santa Barbara, CA

The foglight install is easy. I think I got the kit from enissanparts.com. I don't remember what it cost. The wiring is there and ready to go. The turn signal stalk is easy to replace and the foglights bolt right in. The hardest part is getting the plastic blanks out of the holes.

Do a search and you'll find topics on the factory lights and some people who put in aftermarket ones.
_________________
2008 Pathfinder S 4x4
1997 Maxima
1979 F-150

macbell7 · Joined: 10 Jul 2008 Posts: 106 Location: Charlotte, NC

Well the easiest but not the most cost effective way is to just order the factory fog light kits that have the lights and the turn signal stalk. It will be around $220 I think, but its the most hassle free way of adding fog lights. The biggest problem is trying to find a way to mount aftermarket fog lights in the holes. Make sure you get the h11 bulb size lights cause thats what the wires that are already in your pathfinder will fit. Then just go buy the stalk for $70 at a dealer and your done or you can wire it up your own way.
_________________
08 Pathfinder S 4x4
99 Blazer 4x4
08 Honda Rancher 420 4x4