Moderator: volvite
Thats not bad, I dont know very much about prices for Path Lifts.the front shocks were on special so I got it for 141.00 shipped, and the rear coils were 150.00 plus shipping, so total after shipping was about 312.00
I took some pix of it just sitting the way it would normally, but are you trying to see if it contacts at full drop?mcm4090 wrote:Nice Pathy.
Can you jack up the front and see if the upper control is setting on the coil bucket? I want to see if this lift will cause coil bucket contact like a spacer lift would.
Pic's would be helpful.
Yes at full drop.xd9-g19 wrote:I took some pix of it just sitting the way it would normally, but are you trying to see if it contacts at full drop?mcm4090 wrote:Nice Pathy.
Can you jack up the front and see if the upper control is setting on the coil bucket? I want to see if this lift will cause coil bucket contact like a spacer lift would.
Pic's would be helpful.
Where did you get your camber kit? Do you have a part # for the camber kit?xd9-g19 wrote:well, because 2 in isn't that big of a lift nothing else is needed, but I would recommend new rear shocks while your down there, also you will need a camber kit to get the alignment back in spec, you can buy em from napa, dealer or Greg at PRG. Anymore questions let me know, love helping another pathy enthusiast.