Custom DIY Roof Rack

Upgrades and modifications to Trims, Seats, Carpets, Roof Racks, Panels, Dashboard, Bumpers, Rocksliders, Paint, Decals...

Moderator: volvite

kevinthefro
Posts: 98
Joined: Tue Aug 27, 2013 4:14 pm
Location: Torrance, CA

Custom DIY Roof Rack

Postby kevinthefro » Mon May 20, 2019 6:12 pm

As we know, nobody in the States makes a direct-fit roof rack for the Pathy - the 4Runner racks are a little too wide and a little too short for the roof - so I decided to make my own. That required me to come up with a design, and learn how to weld.

Then, just to make it extra hard, I decided to use oxy-acetylene (even though have access to MIG and TIG welders) and teach myself the lost art of torch welding. I ended up doing a mix of welding and brazing, just for the learning experience.

Taking my favorite design cues from Baja and Gobi, I made a full-size mock-up to see how it fit the lines of the car. By the time I finished this last month, 5" deep baskets have gone out of vogue in favor of 3" and flat deck platforms, but I camp several times a year and the big basket is so useful I can't give it up.

Image
Making a mockup out of PVC in the living room, in 2014. The little holesaw guillotine worked great.

Image

Image
After painting, the mockup looked like the real thing. I really should manufacture these for the 99% who never actually put anything on their roof racks!

Image
2016 - I decided to actually build it it, starting with a jig to hold the frame in place. It caught fire many times.

Image
I had a shop do the bends. This was the only part I didn't do myself and I had to do quite a bit of tweaking to get them perfect. In hindsight I should have just bought a bender.

Image
I bought a big floor-standing used drill press just for this project. Made a plywood jig to hold the tubing in place on the drill press, with a bit of tube on the end as a stop. It made perfectly consistent cuts.

Image
The frame in the background was my first attempt and had to be scrapped because I tack-welded it in the jig, then took it out to finish weld - another big mistake - it twisted and was unfixable. So I had to start over with new metal, new bands, new posts...

Image
Tack-welded.

Image
After much research I bought a Meco Midget torch. Far more precise and maneuverable than an ordinary torch.

Image
The gas weld bead has a very different look from a MIG bead. I welded about 90 of these joints - two frames @ 36 joints each, plus practice. I found it was best to weld half of the circle, let it cool, then weld the other half. This was complex - starting out with a lap joint which heats up really fast, transitioning into a corner joint which heats up really slow, then back into a lap joint, while rotating 180 degrees. I had to learn to change the torch angle to control the heat based on the joint as well as how many seconds had passed as the metal becomes pre-heated.

Image
Frame complete. In hindsight, I should have built the floor and bottom rail together, then added the posts and top rail.

Image
Starting the floor with the floor rails. This is the second set as the first was an abysmal failure. The holes had to line up absolutely perfectly or the round tube wouldn't slide through. The first time I clamped the square tubes together and drilled through, but even using the drill press the bit would wander and come out crooked on the other side. On the second attempt I drilled 1/8" pilot holes through one tube, then used that as a guide to pilot drill the others, then widened the holes to 7/16" with a unibit, then clamped them together and finish-drilled to 1/2".

Image
Legs cut from .120" angle steel.

Image
Stress test of a leg brazed to a floor rail. It passed.

Image
Test fit of floor rails and feet.

Image
Built a second jig to hold the the floor assembly as rigidly as possible.

Image

Image
The 1" tubing was welded, the smaller tubing was brazed.

Image
Completed floor. I thought I was clever by making the round 1/2" tubing pass through the 3/4" square and making the floor thin but rigid. It was extraordinarily complicated and difficult to get everything to line up, then warping was a problem. When I build the next one I'll make the floor out of 1" square, without the grid pattern.

Image
Using the vehicle was a welding platform. Feet in place. Using the stock roof rail bolt holes with studs. I don't know what Nissan was thinking - no two holes are in a line. They are scattered randomly.

Image
Welding the legs to the feet. Doing this last was a huge mistake as the floor prevented making continuous beads, so I had to join lots of short welds which was not very attractive.

Image
Off to the powdercoater

Image
Torch welded. Fine texture powdercoat hides multiple sins.

Image

Image

Image
NMO antenna mount. Got a stainless square bracket, rounded it off and brazed on a lip to make it rigid.

Image

Image

Image
Dremel off the powdercoat for a ground (that's why the stainless).

Image

Image
Gorilla whip mount cut from .120 stock.

Image


Image
Best shovel bracket ever: a stage lighting clamp.

Image
I replaced all the steel parts with stainless.
Last edited by kevinthefro on Wed May 22, 2019 10:59 am, edited 15 times in total.


gorkem_gokay
Posts: 7
Joined: Sun Dec 09, 2018 12:37 pm

Postby gorkem_gokay » Tue May 21, 2019 12:54 pm

nice job well done

User avatar
palmerwmd
Site Admin
Posts: 2343
Joined: Tue Jan 31, 2017 4:45 am
Location: Mid Atlantic

Postby palmerwmd » Tue May 21, 2019 9:21 pm

Amazing effort!! :D

BullDozer
Posts: 165
Joined: Sun Jan 17, 2016 10:27 am
Location: Detroit, Michigan

Postby BullDozer » Tue May 28, 2019 6:36 pm

Awesome.
Thank you for all details.
Are you interested in producing them for sale?

User avatar
underworld1001
Posts: 328
Joined: Sun Nov 27, 2016 9:05 pm
Location: Austin, TX

Postby underworld1001 » Tue May 28, 2019 7:13 pm

Holy hell, great write up! Amazing work on top of that, great job!

kevinthefro
Posts: 98
Joined: Tue Aug 27, 2013 4:14 pm
Location: Torrance, CA

Postby kevinthefro » Tue May 28, 2019 9:32 pm

Thanks for the kind words.
BullDozer wrote:Awesome.
Thank you for all details.
Are you interested in producing them for sale?
That is a great question. Somebody would have to talk me into it.
It was a hugely labor-intensive project. The high-end Gobi and Baja racks are in the $1,500 range, and even charging that much it would be a money-loser. Still, I'd probably enjoy welding as a hobby long enough to build one or two before burning out on it.

User avatar
FLiPMaRC
Posts: 477
Joined: Mon Feb 27, 2012 1:15 pm
Location: NJ

Postby FLiPMaRC » Thu May 30, 2019 8:39 am

:shock: Holy sweet baby Jeezus!!!! :shock: Awesome work! 8) That's what I call "Maximum Effort"!!! :lol:

alatreon27
Posts: 9
Joined: Mon Sep 09, 2019 7:31 pm

Postby alatreon27 » Mon Sep 16, 2019 12:46 am

Incredible work. I enjoy reading your thread.

LuckyR51
Posts: 1
Joined: Sun Sep 22, 2019 8:07 am
Location: Coconut Creek, Florida

Postby LuckyR51 » Sun Sep 22, 2019 8:11 am

First post. looks extremely nice, finding body parts for R51s is no easy task. I know this is a one off, but any chance on selling another one? I'm VERY VERY interested.

terrye
Posts: 3
Joined: Tue Dec 24, 2019 11:02 am
Contact:

Postby terrye » Tue Dec 24, 2019 11:09 am

I believe if you mix and match you can even get a Thule setup to work for you. Although assuming your car is gutted since you're doing events you should have plenty of room for wheels in there. There was a thread on here that had every part number for the Yakima parts. Try searching for that or just wait for one to go up for sale.

User avatar
Touchdown
Posts: 358
Joined: Sat Feb 04, 2012 2:45 pm
Location: Dallas Area

Postby Touchdown » Mon Jan 06, 2020 11:19 pm

That thing is BEAUTIFUL!!
The craftsmanship is top notch!!

@Lucky51 - I hate to say it but terrye is right! As nice is this one is, unless you do the work yourself, it's not worth paying someone for all those hours of work...compared to buying a yakima or thule off the shelf. :D

User avatar
Chris Steffen
Posts: 27
Joined: Thu Nov 07, 2019 11:53 am
Location: Cape Town, South Africa

Postby Chris Steffen » Thu Jan 09, 2020 11:50 am

A fantastic result, well done, I can see lots of time and effort invested there!


Return to “R51 Body Interior and Exterior”