Die-Cut "The Nissan Path" decals?

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

2006R51MD
Posts: 52
Joined: Thu Feb 18, 2010 9:37 pm

Postby 2006R51MD » Tue Apr 06, 2010 8:09 pm

I am in for one, maybe two. Do any of the proceeds go to support the board/forum?


Brokentoy1
Posts: 34
Joined: Wed Mar 10, 2010 2:11 pm
Location: Hutchinson, KS

Postby Brokentoy1 » Wed Apr 07, 2010 7:04 am

That's a good question. If a someone from the site would contact me, we can arrange something. Thanks, Jake

08 pathy
Posts: 88
Joined: Wed Dec 30, 2009 7:19 pm
Location: fl

Postby 08 pathy » Wed Apr 07, 2010 4:38 pm

I'm in for a couple...

fleurys
Posts: 288
Joined: Tue May 12, 2009 5:03 am
Location: Ste-Catherine, QC
Contact:

Postby fleurys » Wed Apr 07, 2010 5:55 pm

I would like ro propose 3 models that you can order now if you want. I will proceed by PM only and the price is the same of any of the 3 models :
12$ CAD Shipped anywhere to Canada or the USA. The size is 11" X 3".... for other countries, extra shipping charge may apply .

They are made from avery or 3m commercial grade vinyl that will last 5 to 8 years outside. They can be applied on glass or painted surfaces. You will also be able to order it to be put on the inside (window) if you whish.

The color availables are the following :

1- Green
2- Red
3- Black
4- Yellow
5- Gold
6- Navy Blue
7- Brown
8- Light Blue
9- Grey/silver
10- White

Image




Here are the samples

Sample 1:
Image



Sample 2:
Image


Sample 3:
Image


If you are interested to order, Please send me your request by PM ONLY with the following informations:

1) Full Name
2) Sample Number , Quantity, Color
3) Inside or outside application
4) Full shipping address
5) email address for paypal invoice



PROCEDURE TO APPLY STICKERS :
Preparation:

Please read these instructions all the way through before starting your application. The surface must be clean, and free of all oils, waxes and dirt. Use Windex or a comparable cleaner to clean the glass. If you use RainX, try Formula 409 to remove it. On painted surfaces wipe with a wax remover or alcohol if applying on freshly waxed paint. These Decals come to you in three layers. The top layer is called the Transfer Tape. It looks somewhat like regular masking tape. The middle layer is the actual Decal. The bottom layer is a Backing Paper treated with a release agent.

Installation

You will need a needle, a drivers license or a similar type squeegee. Try to apply Decal at room temperature ( 55 to 75 degrees) or above. The warmer it is, the better it works, but, try to avoid the direct sunlight. Take the drivers license or squeegee and flatten the Decal on both sides by rubbing over it. If your Decal was shipped rolled, lay it out flat and let it relax for an hour or so. The Decal will be easier to handle if flat. Next, try to make sure the air bubbles are removed as much as possible. There shouldn't be any bubbles but a few at this point.

Double check to make sure that your Sticker where meant for the inside or outside application. 99% of the time they will be for the outside. Turn the Decal upside down on the transfer tape and pull backing off SLOWLY. The backing is the heavier gauge paper. Using a needle or similar pointed object, hold edges of letters and all small areas while pulling away the backing. If a letter moves, just position it back into place by pushing backing down and move letter back to original position.

Now your ready to apply the Decal. Hold the Decal over your desired location and slowly apply the Decal to the surface. Try to touch the surface first at the center of the Decal and then flatten out to the sides. Next, use your drivers license or squeegee again to flatten as much of the Decal as possible. The transfer tape will allow you to rub the decal without damaging it.

Peel back an edge of transfer tape Slowly, your going to be watching for the small letters and corners, to make sure they are sticking to glass, and not to the transfer tape. Remember, patience is the key here. Do not rush. Once the transfer tape is removed, take your fingers and rub gently over the corners and points of your decal to make sure they are glued firmly to the surface. If by chance you have an air bubble(s), use your needle and give the air bubble(s) a small poke, this will create a small hole for the air to escape. Press around the air bubble, working the air to the small hole. The bubbles may disappear after a day or two.

REMEMBER, Once the Decal touches the glass or paint, it cannot be moved again. Patience is the key.

08 pathy
Posts: 88
Joined: Wed Dec 30, 2009 7:19 pm
Location: fl

Postby 08 pathy » Wed Apr 07, 2010 6:38 pm

I like sample one with out the other writing... Just "the nissanpath.com"

fleurys
Posts: 288
Joined: Tue May 12, 2009 5:03 am
Location: Ste-Catherine, QC
Contact:

Postby fleurys » Wed Apr 07, 2010 7:06 pm

If the demand is more for a one liner, than I can do them too. Post your preferences and I will post new samples with new prices...

cruzstyle
Moderator
Posts: 320
Joined: Sun Aug 02, 2009 10:27 am
Location: Sumter, SC

Postby cruzstyle » Mon Aug 23, 2010 10:31 pm

hey guys sorry ive been gone for so long but most of u know ive been in teh dessert and just got back then i got sent to do more training..blah..blah..blah..blah anyways i forked out 100 bucks to see if you guys are still serious abou these decals so here are the decals i had made there all white i have 20 PAIRS ill send u a SET for $5.00 shipped if all the sets sell then we know u guys are serious about these and start the search for a provider. maybe we can even work out a deal with teh guy above so let me know.

PS the best way to reach me is EMAIL [email protected]


this are 1 inch tall and 10 inchs long
Image

User avatar
GOTGOO
Sponsored Member
Posts: 387
Joined: Wed Dec 24, 2008 9:15 pm
Location: St.Louis, MO

Postby GOTGOO » Mon Aug 23, 2010 10:56 pm

Put me down for a set!

User avatar
Sven1olaf
Posts: 108
Joined: Sun May 25, 2008 10:30 pm

Postby Sven1olaf » Fri Aug 27, 2010 10:39 am

put me down for x1.

pm me with where i should send the check.

cruzstyle
Moderator
Posts: 320
Joined: Sun Aug 02, 2009 10:27 am
Location: Sumter, SC

Postby cruzstyle » Wed Sep 08, 2010 8:21 am

pm sent

Shinyboy
Posts: 54
Joined: Tue May 25, 2010 10:15 am
Location: Chapel Hill, NC

Postby Shinyboy » Wed Sep 08, 2010 1:16 pm

cruzstyle...email sent to the address you listed. Sweet decals...look forward to getting a couple sets.

cruzstyle
Moderator
Posts: 320
Joined: Sun Aug 02, 2009 10:27 am
Location: Sumter, SC

Postby cruzstyle » Thu Sep 09, 2010 8:09 am

shinyboy i emaile du back (i think) let me know if u didnt get a reply from me ill re-send it

Shinyboy
Posts: 54
Joined: Tue May 25, 2010 10:15 am
Location: Chapel Hill, NC

Postby Shinyboy » Thu Sep 09, 2010 10:19 am

GOt it man...thanks. I'll catch up on PP in a bit

User avatar
NVSteve
Sponsored Member
Posts: 1987
Joined: Thu Feb 01, 2007 11:27 am
Location: Salt Lake City

Postby NVSteve » Thu Sep 09, 2010 1:28 pm

I might be in for one if someone could post a pic of how it looks installed.

Citcope
Posts: 127
Joined: Wed Jul 09, 2008 3:17 pm
Location: Northern Virginia

Postby Citcope » Sun Sep 12, 2010 8:35 pm

When i get mine from Cruz I will post pics.


Return to “2005-2012 Pathfinder (R51)”