Shouldn't the "Passenger Airbag is OFF" light be illuminated when the pax seat is EMPTY/no weight detected?
2006 R51 with the large circular pax Airbag warning light on the left of the HVAC controls under the Hazard Lights button.
The bulb is working as it illuminates during vehicle startup/ON. The seat weight switch is functioning as I can see it activate in my scan tool when I sit in the seat or get out. Same with the seat belt lock sensors. Nothing appears to be malfunctioning, no flashing airbag light on main console and no current codes in the system.
I feel like since purchase to -3 days ago the light would only go off if someone was sitting in the seat. Then I opened up the center console and dash to remove a Pac-Audio device to return the vehicle to stock, which requires unplugging several connectors, including the one to that light. None of the airbag connectors, wiring or devices under the center console were worked on. I did power up the vehicle several times with the console opened up and that bulb disconnected. After putting everything back together the Airbag light on the main cluster was flashing and a B1023 code (Passenger airbag indicator circuit) was logged. I reset the warning light and left the B1023 as a legacy code in history. When I scan for current codes it finds no issues. Seems like I undid a setting that other/later models had a recall for where Nissan enabled the light to be on all the time except when someone sat down.
Posting here because it seems better than Electrical.