Liftgate Button Pushed In!
Moderator: volvite
-
The Flying Turkey
- Posts: 3
- Joined: Sun Sep 20, 2015 3:02 pm
Liftgate Button Pushed In!
The liftgate “intelligent key systemâ€â€™, “liftgate request switch†(you know the little button you press to lock and unlock) pushed all the way into the chrome trim. I disassembled it and found the metal bracket that holds it in place is rusted out and bent. So I did a forum search couldn’t find any info. Did a Google search and can’t find the part. Anyone know what the part number is?
-
soundandfury62
- Posts: 1
- Joined: Sat Aug 25, 2018 5:06 pm
Re: Intelligent Key Switch
We have a 2001 Silver Edition Pathfinder with the same problem, also cannot find a diagram or a part number for this switch, the metal bracket completely rusted away. I just bought a used lift gate trim piece with the switch in place (on-line), will let you know if there is a part number.
-
The Flying Turkey
- Posts: 3
- Joined: Sun Sep 20, 2015 3:02 pm
The tailgate switch for models with Intelligent Key is # 25210-ZS00A and for models without Intelligent Key is # 25380-ED000. See link below, part codes "25381+A" and "25381":
https://www.nissanpartsdeal.com/parts-l ... m=251_A004
https://www.nissanpartsdeal.com/parts-l ... m=251_A004
Re: Liftgate Button Pushed In!
Good afternoon. I'm a 2012, new-to-me, Nissan Pathfinder owner. Same issue on the button. Solution sounds workable. Just need some advise on getting at it. Is the chrome trim piece one that pops off or do I have to at it from the inside of the vehicle? Thanks, Tim
-
TooMuchControl
- Posts: 353
- Joined: Tue Apr 28, 2020 4:41 pm
Re: Liftgate Button Pushed In!
The rear chrome hatch piece - You have to open it from inside the panel. It's held with 4x 10mm nuts (if I recall). You will need a ratchet or a longer socket to get at it. The inner door trim piece comes off with some logic.
Just be careful with those nuts - it could be a tad rusty in and around them, with some corrosion. Don't use too much force or you could wind up stripping.
Just be careful with those nuts - it could be a tad rusty in and around them, with some corrosion. Don't use too much force or you could wind up stripping.
Re: Liftgate Button Pushed In!
Removal worked out well. 4 nuts on long posts as described. Bracket completely rusted away. Cracked/dry gasket. I'll manufacture a new bracket and fix the gasket leak with some silicone. Thanks!
-
BenjaminWright
- Posts: 2
- Joined: Fri Jul 05, 2024 12:21 am
- Contact:
Re: Liftgate Button Pushed In!
slither io
That solution is very effective
Find Your Forum!