How are the fuseable links replaced?

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

Cooper993
Posts: 135
Joined: Thu Jun 12, 2008 8:09 pm
Location: NJ

How are the fuseable links replaced?

Postby Cooper993 » Mon Dec 07, 2009 6:42 pm

The wire on my electric brake controller has (had) some exposed pins in the connector and I accidentally touched it against ground causing the fuseable link to blow.

When I look at the link it is in a little plastic compartment separate from the other fuses. Does that whole unit lift out or do you open the little plastic cover and replace the individual link?

I can post pics if that helps.


CRK
Posts: 10
Joined: Sun Nov 15, 2009 7:13 am
Location: Cary, NC

Postby CRK » Mon Dec 07, 2009 7:08 pm

yes, pics always help

Cooper993
Posts: 135
Joined: Thu Jun 12, 2008 8:09 pm
Location: NJ

Postby Cooper993 » Mon Dec 07, 2009 8:52 pm

The link is in that little blue box next to the row of fuses

Image

A little closer view

Image

Cooper993
Posts: 135
Joined: Thu Jun 12, 2008 8:09 pm
Location: NJ

Postby Cooper993 » Sun Dec 13, 2009 11:38 am

Well, since no one knew the answer, here it is: The whole little box pulls out as a single unit. I'll go to the dealer next week and see if the links can be replaced individually or as a whole unit.

speedemon0222
Posts: 7
Joined: Sat Nov 28, 2009 6:29 am
Location: Monroeville Al.

Postby speedemon0222 » Tue Dec 15, 2009 3:46 pm

What did the dealership say? Do you have to but the whole unit or can you change them idividually? I would like to know for future refrence. Thanks

Cooper993
Posts: 135
Joined: Thu Jun 12, 2008 8:09 pm
Location: NJ

Postby Cooper993 » Fri Dec 18, 2009 5:49 pm

So finally got a chance to go to the dealer. They don't sell the links individually. So you have to buy the whole little box. He didn't know which one was which part number in his system so he ordered both.

He said one of them cost $15 and the other cost $19


Return to “2005-2012 Pathfinder (R51)”