2000 Pathfinder SE 4x4
I have figured out the squeaking noise I have is coming from my AC compressor pulley. My question is.. Does anyone know if I can replace the pulley and or a bearing or am I going to have to replace the whole compressor to stop the noise? Or is there another solution, besides taking off the belt?
Noisy AC Compressor Pulley?
Moderator: volvite
-
nicky2wotimes
- Posts: 8
- Joined: Thu Apr 30, 2009 6:17 am
- Location: Charleston, SC
-
Nighter-cdn
- Posts: 27
- Joined: Sat Oct 24, 2009 7:46 pm
The noise you refer to is it :
- On cold start up usually when it is wet out
- Goes away once the truck warms up
???
I would love to get rid of mine, from what I have heard it is a common problem and no real solution without spending lots of money. Please tell if you find a cheap solution, that is if your symptoms are one in the same!
- On cold start up usually when it is wet out
- Goes away once the truck warms up
???
I would love to get rid of mine, from what I have heard it is a common problem and no real solution without spending lots of money. Please tell if you find a cheap solution, that is if your symptoms are one in the same!
-
nicky2wotimes
- Posts: 8
- Joined: Thu Apr 30, 2009 6:17 am
- Location: Charleston, SC
The noise always there if the truck is running. It has gotten worse over time (louder). AC still works good. If it was not 110 heat index I would probably just take off the belt. New compressor is around $500, I am pretty sure that will fix it, but I would like to just fix the one I have if possible.
Find Your Forum!