So was told I could reprogram a new key by:

A.Get in the vehicl close and lock all doors using the drivers power door lock-unlock switch
B.Insert and remove the ignition key mpre then 6 times with a 10 second period (at a rate of one insertion/removal cycle per second) The key should be withdrawn from the ignition key cylinder completely each time it is removed.
C.Tirn the ignition key to the "ACC" position. The ignition key should remain in the "ACC" position throughout the remainder of the programming., including programming of additional remote controllers.
D.Press any button on the remote controller one time. If the button is pressed more than one time, the programming procedure willl not be successful.

The hazard warnign lights will flash twice when this step is accurately completed and programming is successful.

This sound like its just to program the keyless remote, right? So i would still need the dealer to program the key (with chip)?


Thanks in advance.

correct that will do just the remote.