2010 Pathfinder LE- Interior Mats Help
Moderator: volvite
-
baironhorse
- Posts: 15
- Joined: Fri Apr 15, 2011 5:56 pm
- Location: Ontario, Canada
2010 Pathfinder LE- Interior Mats Help
I just purchased my 2010...I live in Ontario Canada where I now have a family truck that I can take the kids to school and daddy can go 4x4 in the back roads or to the boat launch...Well winter is a long here and salt causes so many problems to interior...I have a tan/beige interior and want to protect it from elements as much as possible....I called several dealerships and can not get beige rubber OEM mats for my truck...Aftter market ones don't fit right ( atleast ones I have tried)...I prefer to go OEM but can't find anywhere online for this model year and in this colour...CAn you help??? Reccomend a good after market mats for 1,2 and 3rd row...Please help as I tend to take care of my trucks (an use them the way the are intended to as well!!!!!!!)....Your thoughts thanks...
welcome to the forum!Go with Weathertech. I have the carpet lined rubber ones front, middle & a full size one behind the 2nd row seat. They are great. Even the grand kids don't hurt them.
To clean them just take them out & hose them off.
The only complaint I have is that the drivers side one doesn't stay fastened to the hold down peg. I solved that with a flat washer & small hose clamp.
To clean them just take them out & hose them off.
The only complaint I have is that the drivers side one doesn't stay fastened to the hold down peg. I solved that with a flat washer & small hose clamp.
-
baironhorse
- Posts: 15
- Joined: Fri Apr 15, 2011 5:56 pm
- Location: Ontario, Canada
-
baironhorse
- Posts: 15
- Joined: Fri Apr 15, 2011 5:56 pm
- Location: Ontario, Canada
I'm one of those persons who is chalanged by all this technoligy, so I can't post pictures.
What I did is on the post that sticks up from the floor to hold the mat in place, I put the mat on, placed a fender washer over the post & clamped a 1" hose clamp around the psot to hold everything down.
It works great.
What I did is on the post that sticks up from the floor to hold the mat in place, I put the mat on, placed a fender washer over the post & clamped a 1" hose clamp around the psot to hold everything down.
It works great.
Find Your Forum!