Moderator: volvite
mbenes11 wrote:It is really simple, you just have to put the plastic screw-in retainers in the holes where the factory push-in retainers go. Then just use the screws to secure the bug deflector to the hood. I think i still have the written instructions on my work bench somewhere. I will try to find them and scan them for you. Total install time should not take more than 15min.
No it came off another 2010 model....they guy traded his PF for the Armada and is selling off his accessories...Its a dealer OEM part....I have no instructions....I checked the net and only found a very small image but can't make heads or tails of proper assembly...volvite wrote:Now did you buy the deflector that was for the 08+ pathfinder? If you bought one for an older model, 05-07 they won't fit correctly. You will have to do some adjusting as the hood changed in 08.
asgard wrote:I have recently fitted on to my 07, made by Westin - but they cannot be that much different.
First remove weather strip from edge of hood, about 14 small plastic push clips - use small bladed screwdriver to remove.
take pastic mountings circular with tapered section on one end, install large diameter but short length self tapping screws into centre hole, align deflector to hood edge and mark holes to be used.
test insert srews so the start easy once deflector in place.
Install tapered end of plastic bush into slot on the Westin/hole in deflector, lightly tighten and check for centering on deflector, once correct tighten screws - but be careful of the plastic.
reinstall weather strip with plastic plugs - less the 4 that you used for holding on the defector.
Job done.
Welcome to the forum - a fellow Canadain.
here ya go - see "more product images" below the "Price & Availability"baironhorse wrote:Anyone install one of these...I baught one second hand but no instructions....its an OEM deflector by the way....Can you direct me to where I can find an how to install? Is it easy? Your thoughts...thanks