Moderator: volvite
Ok...replaced the serpentine belt this morning...not too hard, not that easy..lol...I didnt use a 14mm socket to releaset the tension, I used a 3/8" ratchet drive and a breaker bar and pushed it left. After the new belt was threaded around the fan, you have to bring back about half of it to go around the bottom pulleys....but it's on, ...the old belt had 86,000 miles on it but still looked in great shape. I am keeping as a spare just in case.webmastir wrote:should do a DIY for the '06 on our belts. i def need one before attempting
*hint* *hint*
Sorry..I am not a mechanic...but you have to remove the air plenum in the center..2 clams on each tube and 2 screws...set it off to the right.webmastir wrote:not quite the diy i was lookin for but thx
NYPathfinder wrote:does anyone know how much fluid is needed for the front/rear diffs? i saw in the owners manual the weight that should be used but it had no mention of how much is needed.
must have overlooked that. Thanks.webmastir wrote:NYPathfinder wrote:does anyone know how much fluid is needed for the front/rear diffs? i saw in the owners manual the weight that should be used but it had no mention of how much is needed.
(larger image: http://farm7.static.flickr.com/6146/597 ... b9c4_b.jpg)
It's from the service manual linked in one of the stick threads in this section