Moderator: volvite
I've got the same issue, never had it with the older radflos I had (using the Calmini spacer) with the 14" spring. But ever since I tossed these on, I've got it, seems to only happen on the way down, yours the same?mtcoastie wrote:I did radflo's and I really like them. However, I have a clunk that I have been chasing for about a year now when I go over speed bumps and such, it seems to happen when the coil-overs extend. I have no idea where it is coming from.
yup. Seems too similar. I don't have a sway bar so that rules out any of that hardware. Recently purchased body mounts yet to be installed.mtcoastie wrote:I don't have the remote reservoir like you do, but yes, SEEMS to be only on the way down. It is driving me insane. I feel like the shudder is getting worse over time. I have changed the front body mounts, put the new style sway bar bushings on, new LCA's, and new inner and outer tie rods. I even mounted a gopro camera on the fender to see if my UCA'S were contacting the top of the strut bucket, and what I saw, and what the tech rep at 4x4parts.com saw when I showed him, prompted me to spend $400 on the extended UCA's. Aaaaand I still have the clunk. I just replaced my brakes a couple weeks ago and found a little slop in my CV axle. I feel like whatever is clunking around up there is causing everything to wear out faster than expected. Hopefully we can find what the problem is!!