Upper Control Arm Spindle

Topics relating to Lift Kits, Suspension, Steering...

Moderator: volvite

User avatar
txcatsailor01
Posts: 7
Joined: Fri Dec 27, 2013 3:48 pm
Location: The Lone Star State

Upper Control Arm Spindle

Postby txcatsailor01 » Fri Dec 27, 2013 3:57 pm

I am changing my front struts. Being relatively new to this I started to disassemble the front suspension. I backed the nut most of the way off the upper control arm spindle bolt and tapped with a hammer to break the seal between the control arm and upper suspension arm. I left the nut on a few threads not knowing how far the whole suspension would drop. Well, now the spindle spins freely and I can neither back the nut off the remaining threads or tighten it back up.

Does anyone have any thoughts on how I move forward?


Return to “R51 Suspension and Steering”