Postby smj999smj » Mon Oct 02, 2017 11:02 pm
You might be okay on the manifold bolts; they were 10MM studs and pretty hefty. You do need to check the exhaust manifolds for cracks, however. I would replace the knock sensor since you'll have the intake manifold off. I usually go with Felpro gaskets and new head bolts. For the timing belt, I use Gates timing belt component kit with water pump. Rockauto probably has the best prices. If you can do a Toyota V6, this won't be any harder. If you replace the bypass hose, get it from Nissan. You might also want to replace some of the coolant hoses under the upper intake.