So this is a bit of a strange request but bear with me.
I found out recently that my radflos are extended travel titan length, which is why they have been extremely too stiff for me in the last 1.5 years that I've had them, and why I have a (previously unexplainable) 4 inch lift in the front. So I'm going to swap the front with Bilstein 5100 adjustable length shocks to try and alleviate these issues and make it so that even a small washboard road won't shake the truck to death.
Unfortunately, since the stock struts and springs were basically shot, I threw them away and don't have the original parts for the upper mount. I need to know what parts I need besides the struts and lower shock mounting bolt for this swap to be successful, and what order they are from top to bottom. E.g. top mounting nuts, mounting plates, isolator, etc.
Beyond that, does anyone know if the 5100 adjustable shocks would take the weight of an ARB front bumper? If so what springs would be best to handle the preload? Thanks!
Edit: For reference, here's a picture of my cart in Rockauto, do I need anything else besides the bilsteins and the springs?
http://imgur.com/a/wh2GVx5