Moderator: volvite
Never thought of that, I'll try that when or if my plastic gets grooved up. Thanks for the tip.GOTGOO wrote:There are two things you can do. 1st is a heat gun and something to press with that has a light grain like 120 grit sandpaper. 2nd and also the fastest way is a propane torch not a big one and turn it on low then sweep across the scratched area. Both of these require you to be carefull not to hold heat in one spot to long. I do auto interior reconditioning for a living. Try it out some where unnoticeable to get a feel for it and the torch methed is not recommended to do while the panel is in the car. Hope it works out for you.