The Nissan Path

starman8tdc

I called your parts place. They said $1250 for the motor. I said it was too expensive. He said "how does $1050 sound", I said no thanks. He said it could be delivered to Washington State for $200 shipping.

Got any other ideas?

starman8tdc

I tried calling some, but they either don't ship engines, or the shipping is way too much. Do you know of any other resources?

starman8tdc

The problem is that:

The engine I need is only in the 2001 and 2002 with a manual trans.

The 2003 and 2004 wont work.

No engine from an automatic will work.

So its very hard to find a motor that will fit, and the ones that will are like $1200. Plus I would have to pay $350 for ...

starman8tdc

How would I go about finding a good used or new crank?

starman8tdc

Can the crank be replaced without removing the heads?

Can the rods be replaced without removing the heads?

2001 Pathfinder 3.5L

Thanks.

starman8tdc

starman8tdc

2001 Pathfinder SE
5 Speed manual
Limited slip rear end
LE black leather seats swap
LE sun visor swap
In dash DVD
Backup cam
2" wheel spacers all around
2" lift kit installed
265/75/R16 tires
Xterra rims
Unlockable manual hubs
Cattle guard
Tail light grills
Roof rack
4 overhead fog lights ...

starman8tdc

Here is some useful info for you.

1) If you don't know exactly what you are doing, don't mess with the 4x4 at all. Leave the transfer case alone.

2) The 100% safest way to use the 4x4 lever is with the engine OFF.

3) When changing from low to high range or high to low, move the shift lever ...

starman8tdc

So you cant run chains on the front because they wont clear the strut. If one were to add 2" wheel spacers, would chain clear everything properly? Has anyone tried this?

starman8tdc

How much is too much browski- a - roni?

starman8tdc

Anyone ever try wheel spacers on the Pathfinder R50? Im thinking 2" spacers. Thoughts?

starman8tdc

Have you been to Walker Valley ORV?

starman8tdc

I have ridden quads at Tahuya. How are the jeep trails? Lots of them?

starman8tdc

I have an 01 SE. New rear springs, and a 2" lift kit (puck).

Question:

Im thinking about going a little higher, with the rubber things that go between the coils to boost height up a little (1/2 inch or so).

Im running manual hubs in the front, so the extra height wont trash the front drive ...

starman8tdc

Im near Marysville, Washington. Walker Valley ORV is a good place to check out. Anyone interested?

Search found 55 matches

Pathfinder 3.5, bad rod bearings. A couple questions:

2001 Pathfinder SE upgrades

Tire chains on the front?

Wheel spacers on an R50

Lift kit options

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums