Search found 12 matches

Return to Search

by mrobers
Wed Mar 21, 2018 5:59 am
Forum: R51 Electrical
Topic: F***, I've finally had it. Fuse to keep seat from moving?
Replies: 2
Views: 2561

Why don't you use the seat memory? Or don't you have it? I have stored my positions (seats and mirrors) on 1 and my wife's on 2. Works perfectly!
by mrobers
Wed Apr 05, 2017 5:54 am
Forum: R51 Engine, Driveline and Powertrain
Topic: Replaced fan clutch, now roar at startup?
Replies: 17
Views: 9049

which company did you use to buy the fan clutch? I will be needing one as well and live in canada I bought it through a seller on eBay (easier for me from the Netherlands as Nissan dealers don't want to send overseas) : http://www.ebay.com/itm/232225704302?_trksid=p2057872.m2749.l2649&ssPageName=ST...
by mrobers
Mon Mar 27, 2017 11:34 pm
Forum: R51 Electrical
Topic: Instrument cluster LCD display went out...
Replies: 0
Views: 1921

Instrument cluster LCD display went out...

Yesterday suddenly the right LCD display (odometer) in my '05 didn't display anything. After pressing the odometer reset button, the text came back so no worries. However; this morning the display again didn't show anything and the button didn't help. After driving for half an hour; the left display...
by mrobers
Tue Feb 28, 2017 2:50 am
Forum: R51 Engine, Driveline and Powertrain
Topic: Replaced fan clutch, now roar at startup?
Replies: 17
Views: 9049

Yeah; I don't think I needed to clean it, but I am used to cleaning the MAF sensors in my vehicles after every year or so. Just a habit :-)
by mrobers
Sun Feb 26, 2017 11:53 pm
Forum: R51 Engine, Driveline and Powertrain
Topic: Replaced fan clutch, now roar at startup?
Replies: 17
Views: 9049

Finally received my genuine Nissan fan clutch from the States and replaced the loud new aftermarket one. Unbelievable how quiet it is from the start; wow... I was able to replace the fan clutch in under 30 minutes by not removing the fan shroud and all. I just removed the engine cover, intake, top c...
by mrobers
Wed Feb 15, 2017 12:06 am
Forum: R51 Body Interior and Exterior
Topic: Recalibrate/reset needle in gauge cluster?
Replies: 3
Views: 3148

Thanks. I also think it might be the needle that needs to be repositioned.

I will go and look for instructions on how to remove the cluster.
by mrobers
Tue Feb 14, 2017 5:47 am
Forum: R51 Body Interior and Exterior
Topic: Recalibrate/reset needle in gauge cluster?
Replies: 3
Views: 3148

Recalibrate/reset needle in gauge cluster?

It looks like the needle of the coolant temperature of my recently bought '05 Pathfinder (EU spec) sits too low when the cluster is turned off. As a result; the temperature is never shown correctly; it shows around 1/8 inch above cool while the coolant temp is around 80 degrees Celcius (read through...
by mrobers
Wed Feb 08, 2017 1:03 pm
Forum: R51 Engine, Driveline and Powertrain
Topic: Replaced fan clutch, now roar at startup?
Replies: 17
Views: 9049

Thanks; I went to the local Nissan dealership over here in the Netherlands today and asked them for an OEM fan clutch. Guess what? They cost $590 over here! What?!?!? So I just went ahead and ordered a genuine OEM Nissan fan clutch from a company in the USA including shipping and customs to the Neth...
by mrobers
Tue Feb 07, 2017 1:58 pm
Forum: R51 Engine, Driveline and Powertrain
Topic: Replaced fan clutch, now roar at startup?
Replies: 17
Views: 9049

You think this behavior could be due to aftermarket?

If so I need to order a Nissan part!
by mrobers
Mon Feb 06, 2017 11:56 pm
Forum: R51 Engine, Driveline and Powertrain
Topic: Replaced fan clutch, now roar at startup?
Replies: 17
Views: 9049

Replaced fan clutch, now roar at startup?

Hi guys! I replaced my visco fan clutch (of my '05 4.0 V6) last Sunday because it was continuously engaged when at operating temperature and therefore loud. After replacing the fan is nice and silent once the engine is at operating temperature, but every single (cold) start of the engine it is fully...
by mrobers
Thu Feb 02, 2017 3:40 am
Forum: R51 Suspension and Steering
Topic: New wheels on my '05 Pathfinder - 285/50R20 - tire pressure?
Replies: 2
Views: 7666

Thanks! I am not planning on going offroad (I have my Jeep Cherokee and Rally Grand Cherokee for that fun) so a 2" lift would be sufficient for good looks. Currently I am running 36 psi (2.5 bar) and I have the feeling it is on the hard side but time has to tell (looking at the wear pattern). I real...
by mrobers
Sun Jan 29, 2017 12:59 pm
Forum: R51 Suspension and Steering
Topic: New wheels on my '05 Pathfinder - 285/50R20 - tire pressure?
Replies: 2
Views: 7666

New wheels on my '05 Pathfinder - 285/50R20 - tire pressure?

I've just put some new wheels and tires on my recently bought Pathfinder over here in the Netherlands (Europe) and I do like how the stance looks now. Somewhat more aggressive and not too ricy. They are Cooper Zeon LTZ 285/50R20 on KMC Rockstar 2 (9x20). Stock suspension and no rubbing. Only thing I...

Go to advanced search