The Nissan Path

myself

recently considered this myself, and was most likely going to cut a set of stock replacements and thread them with a die, then add a coupling nut to make it adjustable. the difference in swaybar angle from stock to a 2" lift really isnt much, and there isnt a lot of room between the outer tie r...

myself

when i lifted mine, i did 50mm front and rear. i used a puck-style front kit for the same model year Frontier, and a rear spring-seat spacer for an Armada. all the R51 specific kits had more front lift than rear, to "level" it, but i wanted to keep the slight rake, and it came out nicely. ...

myself

recent weekend camping trip...

it was outstanding.

myself

Mine died far from home in East Tennessee in late June, after spending a few hours slowly creeping around and idling thru a National Park on a very hot day, with the AC working hard, and very little airflow thru the engine bay due to the low speed. Saw lots of black bears up close though. This 2011 ...

myself

I have a decent gooseneck mount for the front seats, to use my 8" android tablet for navigation, but I also wanted an easy way to watch a movie hands-free when the seats are folded down and the air mattress is deployed. Here's what I came up with, using stuff I had lying around! 1. 8" andr...

myself

The rolled up "kit". Screenshot_20210809-201346-703.png The kit rolled out. Screenshot_20210809-201424-248.png Inside the rolled out tarp roll-up. Screenshot_20210809-201512-765.png Bungee loops attached to roof rack. Screenshot_20210809-201940-764.png Sagging bad because I didn't really t...

myself

Happy to grab some pictures & post them this week.
Maybe as soon as tomorrow evening...

myself

for whatever it's worth - i actually just finished mine... but it's a cheap diy kit. 4 bungee loops for tarps (with the plastic ball) 50ft of paracord, cut into 4 equal lengths 6x8 heavy duty 12mil tarp 2 takedown sectional tent poles 4 tent stakes everything rolls up in the tarp and fits inside any...

myself

Added a small 12" single row bar to the rear of the rack (you know- to see where i've been), wired thru an aftermarket master switch in the factory blank position by the shifter, and added a 3way toggle switch to send power from the master switch to the relay for the top bar when switched forwa...

myself

They look great! So does your rig. :mrgreen: I imagine you may have a roughride? :P thanx for the kind words. i think it looks better dimly lit or slightly blurry. it's always dirty. and the ride is really quite tame & comfortable. i had similar concerns but it's not harsh at all. very happy wi...

myself

myself

2011 LE v6 w/ stock 18s... 2" lift f/r...LT275/70/18. That's roughly 33s, in backroad vernacular. From Tire Recappers...Backwoods A/T... Tread pattern is very similar to KO2s. Been great in mud, snow, slush, creek beds & beaches. Seen about 10k highway miles and besides humming a little, th...

myself

long time observer, 1st time contributor... here's a diy roof rack i put together Dec.2020. Superstrut, some hardware, commercial black coated steel grid, flat bar, 32" slim led bar. No welding. Just a drill, jigsaw & hacksaw, and hand tools. I'd have to double-check receipts, but I'm prett...

Search found 13 matches

Re: Longer sway bar links for 2-inch lift?

Re: Lift help???

Re: Show it off!! Recent pics of your Pfinder, let's see 'em!

Re: Alternator questions

Cheap easy tablet holder for suv camping

Re: Pathfinder Awnings

Re: Pathfinder Awnings

Re: Pathfinder Awnings

Re: Low profile roof rack - Homebrew :o)

Re: Best rugged tire for ~2in lift with stock 18in V8 LE rims

Re: Show it off!! Recent pics of your Pfinder, let's see 'em!

Re: Best rugged tire for ~2in lift with stock 18in V8 LE rims

Re: Low profile roof rack - Homebrew :o)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums