The Nissan Path

dkdontforget

alright just changed the timing belt, it was off by 1 tooth on the left cam, but i still have the same problem

dkdontforget

im taking all that apart right now, from the looks of it, the timing marks on the belt and pulley look like theyre off by 8 teeth. ive never done a timing belt before so not really sure what im looking for

dkdontforget

Checked and double checked, smoke tested and no vacuum leaks

dkdontforget

So one night i was floring it up a hill in 4th gear going about 45mph, pulling fine up the hill and once i reach the top and push the clutch in it stalls. after that it didnt want to stay started has no power, i have to floor it to get to 10mph and it hesitates and looks like its misfiring on all cy...

dkdontforget

So i was driving to work and heard a bad clicking and felt a big drag on the truck pulled over and the starter was smoking, i tried to turn off the truck and it was trying to start i replaced the starter and everything was good for a few starts and then it would keep spinning again so i removed both...

dkdontforget

alright unpluged the light, still have the same issue, clock goes out and resets every time i open a door, no dome light, any position besides auto turns the clock off. tried plugging in a known good 12v light and stepped on the brakes and nothing. checked the wires from the hatch and seem good. pos...

dkdontforget

does anyone know the part number for the 3rd brake light bulb? the only thing i can find are bulbs mine is the led version i believe it is causing problems with my clock, dome and dash lights any time a door opens the clock goes blank and resets itself. dome light wont turn on even with a new bulb a...

dkdontforget

Im not sure what to do here, seems like number 5 isnt getting enough oil... it does that sound under load untill it warms up. if i turn it off after it warms up and start it after 5 min it does it again and its only #5 making the smoke any thoughts http://youtu.be/nGs2Pl48-nI and if you notice the l...

dkdontforget

I want to share an experience with you guys and see if youre experiencing the same When i first bought the truck the first time i got in i hit my head on the door frame, my fiance also did the same. and we just thought ok were dumb Then i went on a road trip the other day invited some friends and di...

dkdontforget

Well i found out the problem, i had a hunch the previous owner didnt take much care of it, so i bought all new fuel filter distribuitor cap and rotor air filter and NGK platinums I took out the old spark plugs and they were some cheap walmart brand that were very worn they also had alot of white on ...

dkdontforget

Alright, doesnt seem to be related to throttle, i had the A/C going and i was barely able to get the truck to move it was hesitating so much, i also picked up a ignition coil for really cheap and made no difference. seems to be related to load checked the air/fuel ratio on the comp and its good also...

dkdontforget

thanks for the info, ill test the tps after work but theres also an error in my part, i misred the instructions and the codes were actually the ecu cycling thru the modes hence 1 2 3 4, and i thought 5 meant a loop. i did it the correct way red led blinks 3 times green 4 so 34 which is still the kno...

dkdontforget

Alright, cleared the codes, now im getting just the knock sensor code, would that cause the hesitation?

dkdontforget

Update, Pulled the codes

23 Idle switch
45 injector leak
12 MAF sensor
34Knock sensor

Alrlight lol, where should i start first?

Update: cleaned the MAF still have the same issue

dkdontforget

heres some pics

the bend is on the far left

Search found 16 matches

Running fine then out of nowhere stalls, running rough

Starter spinning even with relays unplugged

3rd brake light

Valves squeeling (video)

Is this truck a headbanger?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums