The Nissan Path

block007

I will try to get pictures up tomorrow after work. Been a super busy 4th of july this year. thank you all in the armed forces for keeping my freedom to drink beer and blow crap up.

block007

Well i trade the Pathy in for an 2010 suzuki equator rmz4 wednesday. Could not pass up the deal i got, 1000 owner loaty 400 dollar gas card, and sticker on the truck was 30g and got it for 26,500. I will still hang out here every once in a while to see some of the mods i could use for the truck seei...

block007

As far as i know u can. There is a guy on here with a white one that is a all built v8 one and he is running them with lift coils i think. Some of the members that have been on here longer than me may know his name.

block007

Looks good. I lifted mine with front spacers for the forntier and rear spacers for the armada. The ride has not changed much, but i wish i would have went the route you went with the rear springs. The factory springs are soft!!!!!!!!!!!!!!!!!!!!!!!> Looks good. I will post pics of mine as soon as i ...

block007

Sorry for the late replly, but yes the 06 is ready to run the light. i had my 06 s apart to put in new headlights and it was there.

block007

ON a side note thought, I would use the OME springs you have. Yes the spacers gave me some lift but the soft factory springs are still there and they still sag with very little weight in back.

block007

I still needed the compressor to get them back in. Rented from autozone for 50 bucks. The only problem i had is the lack of space in there to work. Now that i know how to do it i could lift the front and back in 3 to 4 hours of lazy work.

block007

I used daystar spacers for the for and rear of mine. Used the lift for the fontier on the front and the spacers for the armada in the rear. Will post pics as soon as i can. With new rear shocks and all it ran right at 250.00

block007

Go to daystars web site and get the rear spacers for the armada. It will lift the rear about 1.5 inches. i did this with mine but it is very tuff to get them in as there is not much room to compress the spring to put it back together. Looks good thought. Will post pics as soon as i can

block007

Confirmed also. I Called them last week and found out it is still a 2 as well.

block007

Daystar has a spacer lift for it. The only problem with it is it is on backorder for a few more weeks

block007

Well my lift is on back order till 1st part of april. When it dose show up i will put it on and post pics.

block007

CAN YOU SWAP THE UNIT WHEEL BEARING HUBS TO THE ARMADA HUBS TO GET THE 6 ON 5.5 BOLT PATTERN FOR A BETTER SELECTION OF WHEELS

block007

thanks for the help njpathy & xd9-g19. I think i got an idea of how i am going to do it. i will post when i am do with pics.

block007

the rubbing of the mud flaps can be dealt with by removing them. the rubbing of the frame is more the cause of the back space of the wheel. i guess what i am looking for is how can i get 2.5 to 3 inches of lift on the thing without it riding like crap. I have to please the CEO of the house ( the wif...

Search found 17 matches

PATHY IS GONE

WHEEL BOLT PATTERN

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums