The Nissan Path

bdsams

So i fixed the button.

If anyone ever has this issue...it's quite simple to pop the back panel off the tailgate.

3 screws: one in the pull handel and two begind the first aid kit - after that, it's plastic clips around the edges and it pops right out.

4 screws to remove the back plate on the ...

bdsams

smj999smj wrote:It's not too bad; it's mostly push clips and a few screws as I remember. Easier than most door panels!

And the million dollar question, know of any guides or videos on this? Ive checked YouTube but not sure if i am searching the wrong criteria.

bdsams

smj999smj wrote:The chrome piece has threaded studs with nuts on the inside of the rear hatch panel. You have to remove the interior panel from the rear hatch and get it at from the back.

Ah crap...how hard is that panel to remove?

bdsams

On the hatch of my pathfinder (2008, LE), the button you press to unlock the car on the outside of the panel (not the one that opens the door) pushed in. The button still works but it feels like the mount the button was sitting in broke.

Anyone know how to take the chrome panel off or access this ...

bdsams

It's XM, satellite radio only broadcasts at "near cd quality" and that's why i have never subscribed, it sounds like piss to me.

bdsams

Any pics to post yet!?

bdsams

Either of you figure this out, looking to do the same.

bdsams

Do you have links to the products/difficulty of instillation?

bdsams

Thanks for the help so far, do you pop the tabs out from underneath ( i would image with a flat head screwdriver?)...

Really want I want to do, is currently the side is popped out but the tabs dont appear to be broken, ideally id like to find a way to pop them back in and try to pop the dent out ...

bdsams

Remove all screws and clips along the front edge, (at quarter panel) the bottom and underneath the lift gate. You have to remove the tail lamps to access the clips hidden underneath them too.

The bumper also snaps in along the quarter panels. the little tabs can break when you remove the cover so ...

bdsams

I managed to back into a small pole and got a decent sized dent in the bumper...dealership wants 700 to replace it, but i want to try and take it off, pop the dent out and see how it looks.

2008 PF LE 4x4 V6

bdsams

It sounds pretty normal,,when in 4Hi it locks the centre diff for a 50:50 Torque distribution,,while in Auto it manages to switch between the two with out you actually doing anything. Ive experienced it my self when i first bought the truck. Driveline binding i think its called.

My 95 ford ...

bdsams

Had an odd occurance (or it was to me). We got a bit of snow last night so I was driving to work in 4w-h instead of auto, everything was fine until i got to my parking garage. There are a couple of hard- near 90 degree turns. When the wheel got close to its max turning radius, it felt like the idle ...

bdsams

I only speak from experiance with my Ram.......The Pathy is a compleatly diff animal. All I know is that my 07 Stock Pathy has more balls than my 04 Ram that has a Volant CAI, Borla proXS muffler and,Modded y-pipe.......Its actually pretty embarising. That is why I have given my ram to my wife ...

bdsams

08 Pathfinder LE V6 47K, 26K w/ tax...fully loaded

Search found 27 matches

Hatch Unlock Button Pushed In [Pic]

How to remove rear bumper?

Driving in 4W-H

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums