The Nissan Path

slavabon

What does this thread have in common with classifieds section?

slavabon

This is possible, but cost prohibitive. Here is a link to a Russian pathfinder forum, where the guy who did this swap did a nice write up: http://www.club-nissan.ru/forums/showthread.php?t=206500 He replaced hood, bumper, lights, grill and all the brackets for bumper and lights. Fenders were the sam...

slavabon

Start with easy things - check to confirm mixing (radiator cap, rad expansion tank, tranny dipstick). Once you confirmed you have this problem, replace your radiator and do the flush. If its not too far gone, you should be ok. What is your mileage? If you're under 80k, it's covered. You can also tra...

slavabon

I found this kit that requires no drilling: http://www.ebay.com/itm/NISSAN-NAVARA-D ... 3f10e224ac

It's more expensive though.

slavabon

They don't cause swaying or squeaking, but replacing old units will certainly eliminate any front end popping noises, if you have any.

slavabon

I did it prior to 80k because I dont like refurbished trannies or mediocre dealer installs.

slavabon

Why would it go back and forth? If something was shorting in the switch, would it not go one way?

slavabon

I'm showing same temps as in the post above on a v6 with the bypass.

slavabon

Boston area.

slavabon

Ok, I found a nice spot tapping into one of the empty relay spots in the smaller fuse box, located on the pass side of the engine bay. It the smaller box, located just in front of the second larger fuse box. Actually I'd call them relay boxes, since they house numerous relays. Well, the smaller, fro...

slavabon

I have adjusted the idle speed a little bit using BullyDog tuner (just bumped it up some 75 rpm) and it feels much better.

slavabon

One pair of headrests in charcoal grey leather. New in box.
$65 shipped

slavabon

This Pro Comp 9 inch fan that can be used on any radiator, but with this size it will be getter suited for OEM or aftermarket external cooling radiators. This unit can be configured to be a puller or pusher, so you can mount it behind or in front of the rad. It can be controlled by a switch or autom...

slavabon

Guys, I'm bypassed and getting ready to install 9" Procomp fan on the existing external factory ATF cooler to help it cool the oil when transmission is under load but truck is not moving fast (hence no air movement through the cooler). I have a pooler fan, which I'm thinking of installing behin...

slavabon

I'm looking for a switched power source (activates when ignition is on) in the engine bay to power a cooling fan on external transmission cooler. What would be a good wire to tap into? Thanks!

Search found 214 matches

2010 LE charcoal leather front headrests

Pro Comp 9 inch transmission cooler fan

Switched power source in engine bay?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums