The Nissan Path

socal4x

I amcurrently getting the rear bumper linexed...will post pics...stay tuned

socal4x

Fear not...PRG took about 4 days to get back to me, and I am in California. Greg @ PRG wrote that their kits are in full production...the benefit of their setup is you can adjust the front coil to compensate for the lift you want, corresponding to the weight you add to the truck. When you are done, ...

socal4x

Anybody purchase an extended warranty for their Pathfinder?

Getting near the mileage point, wanted to know what dealers are charging out there.

socal4x

I think the worry about galvanic corrosion is a bit overkill...where are you living/driving?...What series of aluminum is it...is it anodized?...If you live on the ocean (seawater), it could be an issue. Saltwater/seawater is a good electrolyte for the process to occur... I would use nylon washers t...

socal4x

Thanks for the info...and, yes, that all makes sense. I am very interested in exploring this further. Since the fronts are an adjustable coil-over, once you set the rear height, you can balance the front accordingly (assuming you don't increase the angle of the CVs by too much). I know the OME rear ...

socal4x

So, if I am understanding this correctly, you are 1" higher in the rear (than with OME only) with the setup you now have, using the PRG spacer and the OME rear springs in combination?

How did you align it? Did PRG do the work?

Pics and Info @ your convenience please!

socal4x

I was looking over at Nissan's parts and I really hate the way the PF rear suspension cannot carry/ or to soft of the ride. I see the the V8 has different front and rear springs. does anyone know what the difference is? I thinking of going OME but do not want to hurt my Extended warranty Warranty s...

socal4x

My bet is its priced at the same point as the ARB bumpers...

Where's the matching rear bumper???

socal4x

nj05pathfinder wrote:Hey guys, I'm new here, but have read a long time on this site regarding this exhaust set up. The only guys around me in Bayonne, NJ that can weld up a custom exhaust is Meineke. Now I'm not crapping on them, but are these shops competent enough

NO!

socal4x

Sounds like custom may be the way to go.

Magnaflow offers a system for the Xterra and Frontier...I emailed them...

The systems should be very similar, right?

socal4x

Not to sound negative or anything, but they (Calmini) don't seem to be in a hurry... Look at shrockworks.com for real tubing stuff. The more inquiries they get, the more likely they will put up a Pathfinder section. (hoping anyways) Myself and alot of members here have their sliders and skidplates.

socal4x

Under the Pathfinder section it has a spot for bumpers, then says..."Coming Soon"

...so my guess is in house "test bed"...cosmetic, or a structural bumper, who knows?

socal4x

I had the Gibson too...ripped it out and I was p"""ed...

They problem I had was with resonance...the inside of the cab was vibrating like crazy!

socal4x

This topic hasn't been covered in a while...

What custom exhaust or mufflers are you all running...Gibson, etc.? Clamp on, welded, muffler only, or???

I know there isn't much available out there of our rigs, but just checking...also since the new V8 has been out for a while....

socal4x

You got it...3M anti slip tape...sold in different width rolls (I got the 12") at www.mcmaster.com, or any industrial supply outlet. I had a hole (don't ask) and a gouge from backing into a rock outcropping. I sanded the bumper flat then stuck the tape on....it kinda has a bedliner look to it. ...

Search found 112 matches

Extended Warranty

Re: V6 Se V8Se springs

Custom Exhaust

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums