The Nissan Path

DiBo

Nice!

DiBo

Sorry for the late reply. I had 16"s stock. The wheels fit fine in the rear but would not clear the caliper up front. Maybe go to a wheel shop and ask if they could test fit just a wheel to see if they clear. It was all about the shape of the wheel face that made it now fit. They said they woul...

DiBo

This does seem to be a "quirk" with our vehicles. I have a little wobble over rough roads but the wheel does not her out of my hands. I do however find the vehicle almost u driveable on dirt roads. Like it wanders all over black and fourth.

DiBo

Lol, not that I didn't believe you, but pic always help. People thinking of the same thing.

Good job by the way. Been thinking of the same thing to bring up my front a. Little

DiBo

I have a sportrack box. I have had it on the rig for years now and love it. I got it on clearance for $180 canadian. It's still in like new condition. The thing is like 7 feet long and fits 3 full sized Diggle bags easy. It goes right onto the stock rails no problem.

DiBo

What kind of lift and how much do you have already? What components you have?

DiBo

From what I know, if there was a failure of the trans cooler part of the rad the fluid would be compromised. You may have a bad head gasket and getting oil into the trans in which case could be expensive. Can you post a picture of the fluid from the trans, the rad and maybe the engine oil. Could be ...

DiBo

I agree that the wheel bearing is more than likely the issue. Jack the tire of the ground and see is you have any play when you shake the tire, like pulling it and pushing sideways horizontally and vertically. There should be 0 play. If there is any it's the bearing. Also it's a pretty easy diy proj...

DiBo

That's a wicked deal if your just going for looks and bigger tires. You can get an actual 3" lift from 4x4parts.com that comes with the extra stuff like steering extension and brackets for the bumpers and what not, night be worth the extra money. I'm sure someone on here has done a diy. I've be...

DiBo

Seeing if anyone has any insight on this.

Wiper motor for the rear glass. Does it have to be from a pathy or can it come from some other rig like an armada or xterra or something? Arlington find a hunker with a good one and trying to expand my search, lol.

DiBo

Good catch, nice that it's all pathy specific, seems like a good database for bulbs.

DiBo

i have electric tape covering the flashing tire pressure light.

DiBo

Thanks guys, after reading up on RockyMtnX on the thenewx board and DiBos thread, I'm just going to make my own. Ordering the metal from Metals Depot cost me $35 shipped. Just need to find someone local to cut the shapes and holes. I'll post my results. ok, going to upload a the picture i used for ...

DiBo

i got a metal guy to make me some. they are like the aussie ones.

http://www.thenissanpath.com/viewtopic.php?t=9779

this is my thread, it took a long time to actually get to doing it but they are superstrong now.

DiBo

pics or it didn't happen!!

Search found 226 matches

Rear wiper motor

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums