After bringing it up 2", it'd be nice to get some extra width for a bit more stability, hence why it would be nice to add some offset from stock or the wider 285 tires. Wow, I like those Tread Wrights. I don't have much for selection of tires where I'm at right now for at least the next year. I...
Is anyone here running a 285/75/16 with a 2" lift? I know it'll rub stock. I should be getting my 2" in shortly now that I finally got all the parts, and I know I'm going to want to get a MT in there. I'd like more tread width than the 265 (265/70/16) I have now. Honestly, I'd stick with t...
Yep, just swapped out the auto tensioner and (unknown to me) Gates belt that was on there... no more belt wine and no more tensioner squeal. **INSTALL TIP** As mentioned earlier... correct, ignore the instructions: 1. Remove the top engine cover (2 bolts, 10mm) 2. Remove front side air intake (2 bol...
Ok, live Data reads (not a continuous read when recording, only every X amount of seconds, I'll have to check amount of time X is)... DTC_CNT FUELSYS1 FUELSYS2 LOAD_PCT(%) ETC(degF) SHRTFT1(%) LONGFT1(%) SHRTFT2(%) LONGFT2(%) RPM(/min) VSS(mph) SPRAKADV(deg) IAT(degF) MAF(lb/min) TP(%) O2S B1S12--B2...
I'll try to run it tomorrow and see what it shows... from my first glance, it was quite a bit... I have to clear that stupid code I keep getting due to my VCV stuck open anyway.
The Roadi RDT69 Scan Tool http://www.roadico.com/roadi-products.php and http://www.roadico.com/manuals/RDT69%20Manual.pdf I've only done a quick "oh please read this damn car" test for about 10 minutes, but it seems like a pretty decent tool. I picked it up on Amazon a month ago for $112.9...