The Nissan Path

trance34

I have 58,600 miles on my 05 and have not had any fuel sender issues. My fuel gauge will move up when I turn the truck on, and it is accurate. The DTE will take about 30 secs or so to get up to the correct amount. I usually fill the truck up one the low level light comes on. I guess I should cross m...

trance34

Thats good to know, if this happens again I will look into doing that.

trance34

2 hours of work, on a 30 min job, and double the price of the part, thats not paying for service and warranty, thats paying for the service managers new tv.

trance34

I replaced my belt a few months ago, and about a month later I start hearing what sounds similar to belt squeak. I decide it's either the idler pulley, or the auto tensioner. I take them both off and inspect them. They both seemed ok, so I wd-40 them and put them back on. Noise is still there. I dec...

trance34

If they were really that important why would Nissan's answer to fixing them being to take them off? To each his own, I've taken them off most all my vehicles as they start to rust away or start rattling. Replacing the clamps would work also.

trance34

I'm not sure, but even if there are why waste the money?

trance34

Nissan says that they just cut them off when they rattle. I live in IL, if I put a metal hose clamps on they will be rusted off after a winter. I went the Nissan way and just took them off.

trance34

I am also around 54k, I just replaced tires and brakes.

For tires I went with Bridgestone Dueler A/T revos

And for brakes I did EBC rotors and EBC green stuff pads. I didn't need to rebuild mt calipers.

trance34

I just put on EBC rotors with EBC green pads and love it. Even the wife noticed a difference right away.

trance34

blink32 wrote:Aren't the 7's the same essentially except lower dust? Keep us posted.

You are correct, I got them confused with the description for the yellows.

trance34

Are you going with the slotted or slotted & dimpled rotors? And any reason you're not going with the 7k series instead of the regular 6's or even the yellow stuff for Truck/SUV's? Definitely post your results. I'm currently running the dimpled/slotted with 2000 series Greenstuff on my Sentra an...

trance34

I'm not sure if there is a DIY. Shouldn't be any different then any other brake job. I'll keep my camera near!

trance34

I will be doing full front swap, rear pads, and new fluid this weekend.

Fronts will be EBC rotors with EBC 6000 greens. Rear pads are Akebono.

i will update once done.

trance34

It's the driveshaft/propeller shaft. Mine did this and it is covered under the drivetrain warranty. Save yourself the time and just take it in.

trance34

making a turn will disengage it from 4hi to 2

Search found 84 matches

Auto tensioner noise

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums