The Nissan Path

Code Pathfinder

I decided a couple of weeks back that it was time to upgrade my speakers again. ' I had replaced my OEM speakers with kicker Speakers but over the years, I have worn out those speakers and already damaged one of them due to puncturing the cone during installation (dumb 16 year old me at the time :lo...

Code Pathfinder

So the Pathfinder has not seen many upgrades this winter so far. that being said, I did upgrade my battery terminal clamps with some high quality terminal blocks from ruggedrocksoffroad.com Link to them: https://ruggedrocksoffroad.com/power-distribution-terminal-blocks-by-rugged-rocks.html here they...

Code Pathfinder

Model year- 2009 Lift height: 7 inches front, 6 inches in the rear Type of lift: Titan Swap with Drop Bracket Lift up front. 4 inch Subframe lift with 2 inch coil spring spacers in the rear (upgrading to Armada Springs soon). Brand: Rough Country Drop Bracket Lift for the Nissan Frontier, Various Ti...

Code Pathfinder

HOw did you dial in the rear ?? I am maxed out with the 2 inch SFcreation puck and the Iron man springs I am 1.3 out of alignment ALSO: The suspension lift portion is maxed out at 2 inches of suspension lift. After 2 inches of SUSPENSION LIFT, you cannot get the rear end aligned properly. The adjus...

Code Pathfinder

ohhh this would solve my issues I need a parts list and 3 months 2) OEM Titan Lower Control Arms 2) Titan Tubular Upper Control Arms from Rough Country What year lowers ?? or are they the same ? I have SPC uppers and CJD Racing outters coming.. Im going to use stock spindle for now and order the NI...

Code Pathfinder

HOw did you dial in the rear ?? I am maxed out with the 2 inch SFcreation puck and the Iron man springs I am 1.3 out of alignment 1. 4 inch Sub frame lift in the rear provides a majority of the lift. The sub frame lift is essentially a frame drop. Because it drops the sub frame down, It does not ef...

Code Pathfinder

Pathfinder is back on the road again! The Dirt King Fabrication 3 inch tie rod extensions did the trick with the stock Inner tie rod and the fabtech outer tie rod. Titan Sway bar was flipped down when I got the truck. That was causing my wheels to rub against the swaybar at full turn. Since I had Ti...

Code Pathfinder

ohhh this would solve my issues I need a parts list and 3 months 2) Front-wheel Pathfinder hubs 1) Rough Country 6 inch Lift Kit Nissan Frontier 1 set) PRG Billet Sway Bar Mounts 1) Titan Sway Bar 1 set) PRG Extended Length Titan Swaybar Endlinks 2) 6 inch Extended Brake lines. 1) R180 Differential...

Code Pathfinder

Our subframes are identical twins. What did you end up spraying your subframe with? I went with Eastwood Rust Encapsulator. I'm still not happy though so I may opt to swap out my rear subframe in a year or two with a rust free unit. Rust Oleum Rust Converter and Rust Oleum Underbody chassis paint R...

Code Pathfinder

Do Not Order from CALMINI.

They are a nightmare to deal with.

Code Pathfinder

I drove down to the shop yesterday to drop off some needed parts for the pathfinder build. Here are the parts I dropped off and some pics of the truck underneath: DIRT KING FABRICATION Outer Tie Rod Extensions: https://i.imgur.com/G1yOGJMl.jpg PRG PRODUCTS Outer Tie Rod Extensions: https://i.imgur.c...

Code Pathfinder

Do you guys think I could clear the V8 Brakes with my 16x8 American Racing Wheels with 1.5 inch wheel spacers?

My wheels are 0mm offset, and 4.5 inches of backspacing.

Code Pathfinder

If you want to see the final result, here it is on a different thread.

post99496.html#p99496

Code Pathfinder

The other options I have to fix the tie rod issue: 1. Remove the fabtech knuckle and install the rough country spindle that came with my kit. These however require 18x9 wheels with 5 inches of backspacing and 0mm of offset or more. I would need to buy new wheels and tires to make that happen. 2. Ord...

Code Pathfinder

Alright, so one quick note: DO NOT USE THE FABTECH KNUCKLES FROM THE NISSAN FRONTIER 6 INCH LIFT KIT. THEY ARE A NIGHTMARE :( https://i.imgur.com/LEwwQ8Zl.jpg This is a titan swap specific outer tie rod threaded into the pathfinder/frontier/xterra inner tie rod. As you can see, its too long :evil: D...

Search found 209 matches

Alpine R Series Coaxial Speakers Installed

Battery Terminal Distribution Blocks by Rugged Rocks Installed

Re: Ultimate Lift thread

Re: 7 Inch Lift Installed 05-12 Pathfinder

Re: 7 Inch Lift Installed 05-12 Pathfinder

Re: 7 Inch Lift Installed 05-12 Pathfinder

Re: 7 Inch Lift Installed 05-12 Pathfinder

Re: 7 Inch Lift Installed 05-12 Pathfinder

Re: Rear Differential Breather Kit

Re: Lifting the Pathfinder

Re: 7 Inch Lift Installed 05-12 Pathfinder

Re: Another V8 Brake Upgrade Complete

Re: Coming Soon: Front Drop Bracket Kit install and Regearing

Re: 7 Inch Lift Installed 05-12 Pathfinder Part 3

7 Inch Lift Installed 05-12 Pathfinder Part 2

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums