Rear camber kit for a 2011 LE 4x4??

Topics relating to Lift Kits, Suspension, Steering...

Moderator: volvite

User avatar
Sanfer
Posts: 19
Joined: Wed Sep 02, 2015 6:04 pm
Location: Dominican Republic

Rear camber kit for a 2011 LE 4x4??

Postby Sanfer » Thu Sep 10, 2015 6:58 pm

where can I get it?
Is it really necessary?
In the last alignment service the numbers were TOO close to red...and no possible to make more adjustment...
Thanks for give me a hand on this.


azaizai
Posts: 83
Joined: Wed Aug 13, 2014 7:28 pm

Postby azaizai » Fri Sep 11, 2015 4:55 am

Well you can either get the Nissan ones from Nissan (or online vendors) or get an aftermarket company's version.

SPC is the company I usually go for and any local parts house should have them.

Or just search for "2011 Pathfinder rear camber bolts" and click on shopping.

User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Fri Sep 11, 2015 5:21 am


User avatar
smj999smj
Site Admin
Posts: 6070
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Fri Sep 11, 2015 1:03 pm

Rear suspension should already have the eccentric adjustment bolts from the factory. The camber/caster bolts from Nissan won't be any different from what you already have on your vehicle. Is the suspension stock or modified?

User avatar
Sanfer
Posts: 19
Joined: Wed Sep 02, 2015 6:04 pm
Location: Dominican Republic

Postby Sanfer » Fri Sep 11, 2015 7:34 pm

It seem I got it wrong and the stock eccentric rear bolts do the job ok, which is not the case for the front suspension.

Thanks to all.-

User avatar
Sanfer
Posts: 19
Joined: Wed Sep 02, 2015 6:04 pm
Location: Dominican Republic

Postby Sanfer » Tue Sep 15, 2015 9:19 pm

I got this info today from 4x4 Parts. Anyone familiar with it?

Image

User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Tue Sep 15, 2015 9:59 pm

Can you let us know if your alignment is fixed with those thanks

User avatar
Sanfer
Posts: 19
Joined: Wed Sep 02, 2015 6:04 pm
Location: Dominican Republic

Postby Sanfer » Tue Sep 15, 2015 10:26 pm

Thupertrooper, I haven't order it yet looking for any feedback before that.

Mike V from 4x4Parts told me "these will give you ability to adjust your alignment by rotating sleeves in your upper a arms of rear suspension"

I haven't speak to him yet after receiving his email showing this new (?) kit.

This is the link: http://www.4x4parts.com/i-22756999-rear ... hings.html

User avatar
Sanfer
Posts: 19
Joined: Wed Sep 02, 2015 6:04 pm
Location: Dominican Republic

Postby Sanfer » Wed Sep 16, 2015 1:36 pm

FYI
This is it!
Message from 4x4Parts:
"You originally ordered lower a arm camber alignment kit which is the same as your stock lower a arm camber alignment kit.
From what I understand you are looking for ability to get more alignment range then what you get with your stock lower a arm camber bolts, by installing upper a arm off-set bushings you will be able to get additional alignment for rear end if you are having problems getting rear end aligned in your R51 Pathfinder."

User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Wed Sep 16, 2015 3:05 pm

Thank you for the info


Return to “R51 Suspension and Steering”