Part identification ('03 Pathfinder) - Rear Window

GG671 · Postby **GG671** » Sun Jan 24, 2016 2:30 pm

Hello,

I have on '03 Pathfinder. I'm looking for a (probably very cheap) replacement part that goes on the back window. It's a plastic cover/cap, I'm guessing for the rear window brake light mount. For the life of me, I DO NOT know what this part is called, and can't find it online. I've attached a couple of pictures for reference. As you can see (on my very dirty windows), the missing plastic cap has exposed the metal underneath to the elements, and I get rust stains on my rear window. I'd like to find a replacement cap. Any help would be appreciated.

Postby **smj999smj** » Sun Jan 24, 2016 10:42 pm

I believe that's what's referred to as the "Stud assembly-back door window," Nissan part number 90460-11A10. Refer to part code "90460N" on the part diagram linked below:

http://www.nissanpartsdeal.com/parts-li ... tting.html

GG671 · Postby **GG671** » Mon Jan 25, 2016 7:23 am

Ahh, thank you kindly, sir

Hawairish · Postby **Hawairish** » Mon Jan 25, 2016 4:51 pm

I think the part SMJ gave is for the back side of the lift support strut. Take a look at this diagram instead:

http://parts.nissanusa.com/nissanparts/ ... &siteid=14

I think the p/n is either 26593-0W000 (26983E in diagram) or 91776-30P00 (26590H). The latter is listed as a screw, but I don't know if it has a protective cap that may have just corroded on yours. The former is a grommet, but can't tell if it maybe has a cap that covers the screw.

Postby **smj999smj** » Mon Jan 25, 2016 8:08 pm

Hawairish wrote:I think the part SMJ gave is for the back side of the lift support strut. Take a look at this diagram instead:

http://parts.nissanusa.com/nissanparts/ ... &siteid=14

I think the p/n is either 26593-0W000 (26983E in diagram) or 91776-30P00 (26590H). The latter is listed as a screw, but I don't know if it has a protective cap that may have just corroded on yours. The former is a grommet, but can't tell if it maybe has a cap that covers the screw.

Yeah, you could be right. It's hard to tell by the pictures provided.

GG671 · Postby **GG671** » Mon Jan 25, 2016 9:49 pm

Ok, thank you. Yeah, I don't think it corroded, though. I think the cap on top of it came off, and then the underside corroded. The top is plastic, so that part couldn't corrode.

GG671 · Postby **GG671** » Mon Jan 25, 2016 10:05 pm

Much better diagram. After looking at it, I'm thinking that the screw itself has the black plastic covering. Hopefully, it comes like that. Here's another diagram on ebay..

http://www.ebay.com/itm/NISSANINFINITI- ... Vw&vxp=mtr

Part identification ('03 Pathfinder) - Rear Window

Part identification ('03 Pathfinder) - Rear Window

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums