Moderator: volvite
The wheel hub center hole diameter can be decreased from 71.4 mm to about 64 mm and then rebored to the correct Nissan PF 66.1 mm size at a machine shop or wheel specialist shop. Another option is to have a machine shop make up a hub spacer for between the wheel and hub which would also work as a hub nut cover, a molded wrench size on the outside edge of the hub cap might save some down the road rim removal problems, use lots of CopperCoat or similar lube on the inside of the spacer / hub cover if you're going this way.bigmac wrote:what are those ways ?
btw, thanks for all the info!
If you want bomb proof Mil-spec type steel wheel though Stockton custom wheels has the Hummer 24 series available in anybigmac wrote:what are those ways ?
btw, thanks for all the info!