Hi All,
Just had it in for alignment after 2" Rancho Quicklift install. Front alignment was easy and no issues. Rear alignment camber was within spec, but both rears were toed out.
So, I am going to cut out toe adjustment bolts in spring control arm and install new lower spring carrier arms with new bushings, and new factory cam bolts. Going to reuse nuts and washers on these ones.
I can see how these two bolts clearly adjust the toe. The camber bolts also looked to be pretty near siezed, however he didn't mentioned I would need to replace them. My question:
Once I install new toe adjustment bolts and toe is adjusted is there a chance the camber adjustment bolts for the rears will need to be used to bring things back into alignment and I will be ordering up a new set of camber alignment bolts for the LCA as well?
If not clear let me know - Thanks guys and gals. Whole new game for me learning about 4 wheel alignment, pretty interesting and somewhat basic stuff, if it weren't for massive amounts of rust.