Moderator: volvite
I think my first post, I posted and fell asleep right after so forgot about it, lol. I got on today and was like, wait what did I do.BullDozer wrote:Hi. I think this is an extra post to your prevous post.
I orderd mine from autozone
Part :
CS81085
With tape measurer before I was at 34.5,now 37 inches
There was a post a while back showing armada springs from I think AC Delco for around $40 + shipping.
When comparing the pathfinder to the armada springs. They are almost the same height, but the thickness of the armada is much more. This makes it both stiffer and the pathfinder sits higher because the springs wont compress as much since they are so thick.
One nice affect, no longer even close to bumping my head on the rear hatch when opening.
These supposedly work pretty well:Kilaman wrote:Yes it does lift the rear!! and yes it does put the rear camber out of adjustment. I am still looking for a rear camber kit.
You should be safe with any 2004 - 2015 Armada. I think mine was a 2007 Armada for my 06 Pathfinder.Gprice wrote:Can someone tell me what year models will work? I have a 2008 Pathfinder . I am curious about swapping the rear springs with an Armada set. Do they need to be from the same year or is there a group of compatible year models?
Gprice wrote:Awesome. Thank you. That’s is around the lift I was looking for. I am thinking of getting the Rancho quick lift for the front. I’ve had some issues with it squatting too much in the back . So when I saw people using the Armanda springs, it made rethink the airlift.
Over a year later and I finally requested you on IG, this weekend I'm finally doing the front rancho quick lift and rear Moog armada springs. I've had the parts sitting in my garage since last summer.DiBo wrote:Check out my instagram, @dibofarrell
I have everything you need to know about armada springs on the path.
mic209 wrote:Over a year later and I finally requested you on IG, this weekend I'm finally doing the front rancho quick lift and rear Moog armada springs. I've had the parts sitting in my garage since last summer.DiBo wrote:Check out my instagram, @dibofarrell
I have everything you need to know about armada springs on the path.
kevinthefro wrote:Last week I put in the Moog 81085 Armada SE rear springs and got 3.3" of lift over stock.
Chopping off a little more than a full coil brought it down to my target of 2", plus stiffened it up a bit more which I also wanted. Previously I was using the PRG spacer and Airlift bags.
I think this is a much better solution.
This is one full coil (360°) plus 77° aka 109mm aka 4-1/4":