Swaybars

**** PLEASE USE SUBTOPICS BELOW FOR NEW TOPICS ****

Moderator: volvite

Post Reply
User avatar
BMXPath
Posts: 361
Joined: Fri Oct 19, 2007 7:55 am
Location: Texas!

Swaybars

Postby BMXPath » Wed Feb 04, 2009 11:19 am

V6 and V8 R51's have different swaybars, at least on the front. Anyone know the diameter of the V8 front swaybar?
I have the V6 model and the front is 1 1/8 inches (28.5mm).

Thanks.

Top
pearl62
Posts: 57
Joined: Mon Dec 01, 2008 11:43 am
Location: Morgan Hill, California

Postby pearl62 » Sat Feb 07, 2009 10:33 am

I am hoping someone with a V8 PF can measure their front bar... A bigger front bar in our V6 models might help the handling...
Top
User avatar
rragpaoa
Posts: 302
Joined: Thu Aug 24, 2006 10:23 am
Location: San Diego, CA

Postby rragpaoa » Mon Feb 09, 2009 11:31 pm

I have the V8 Pathy. I'll check it.
Top
jorgecar
Posts: 52
Joined: Wed Jun 28, 2006 4:17 pm
Location: Costa Rica

Postby jorgecar » Tue Feb 10, 2009 9:28 am

pearl62 wrote:I am hoping someone with a V8 PF can measure their front bar... A bigger front bar in our V6 models might help the handling...
That's a very good line of thought...
Top
User avatar
BMXPath
Posts: 361
Joined: Fri Oct 19, 2007 7:55 am
Location: Texas!

Postby BMXPath » Sat Feb 28, 2009 5:29 am

jorgecar wrote:
pearl62 wrote:I am hoping someone with a V8 PF can measure their front bar... A bigger front bar in our V6 models might help the handling...
That's a very good line of thought...
That is why I asked... :wink: I wanna put the bigger bar on my V6. Curious what size it is because if I do it, I may as well go with urethane bushings too.

ragpaoa,
Any measurements yet?
Top
User avatar
Captain
Sponsored Member
Posts: 692
Joined: Wed Mar 19, 2008 7:41 pm
Location: S.w. Chicago

Postby Captain » Sat Feb 28, 2009 5:59 am

I thought the PF handles great. I would like for the quick disconnect for mine.
Top
User avatar
guinnessjim
Posts: 245
Joined: Wed Jan 16, 2008 7:58 pm
Location: Newport, OR

Postby guinnessjim » Sat Feb 28, 2009 10:44 am

Captain caveman wrote:I thought the PF handles great. I would like for the quick disconnect for mine.
ditto
Top
pearl62
Posts: 57
Joined: Mon Dec 01, 2008 11:43 am
Location: Morgan Hill, California

Postby pearl62 » Sat Feb 28, 2009 6:41 pm

ragpaoa wrote:I have the V8 Pathy. I'll check it.
Did you get a chance to check?
Top
User avatar
fat_frog
Posts: 85
Joined: Mon Mar 02, 2009 12:18 pm
Location: 19320

Re: Swaybars

Postby fat_frog » Wed Mar 04, 2009 12:41 pm

BMXPath wrote:V6 and V8 R51's have different swaybars, at least on the front. Anyone know the diameter of the V8 front swaybar?
I have the V6 model and the front is 1 1/8 inches (28.5mm). Thanks.
Is 28.5 mm the diameter or the circumference?

Not sure if Nissan changed the size of the stabilizer bars from '05, but...'09 Pathy spec on NissanUSA site says...

Front stabilizer bar: 33.0 mm for V6 and 34.0 mm for V8.
Rear stabilizer bar: 25.4 mm for both.
Top
pearl62
Posts: 57
Joined: Mon Dec 01, 2008 11:43 am
Location: Morgan Hill, California

Postby pearl62 » Wed Mar 04, 2009 10:38 pm

I just measured the front sway on my 2005 V6 and it is 33mm.
Top
Post Reply

Return to “2005-2012 Pathfinder (R51)”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2024 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy