Lifted

Topics relating to Lift Kits, Suspension, Steering...

Moderator: volvite

PathfinderDaddy
Posts: 32
Joined: Wed Oct 30, 2019 1:55 pm

Lifted

Postby PathfinderDaddy » Tue Oct 06, 2020 4:11 pm

Installed my Iron Man 2 inch lift on top of my 2 inch spacers and well thats not going to work.. the upper control arm is laying on the Coil mount... I will have to pull the coil mounts tomorrow and wait for the delivery of my Calmini 5 inch lift

https://www.calmini.com/detail.php?b=1& ... 1&p=644&n=


User avatar
palmerwmd
Site Admin
Posts: 2343
Joined: Tue Jan 31, 2017 4:45 am
Location: Mid Atlantic

Re: Lifted

Postby palmerwmd » Mon Jan 24, 2022 6:09 pm

Did your Calimini lift get delivered and make it on your truck? :)

silverarrow27
Posts: 414
Joined: Sat May 02, 2020 1:40 am
Location: Banning, CA

Re: Lifted

Postby silverarrow27 » Tue Jan 25, 2022 3:34 pm

I know this post is old, but in case the OP is still looking for a solution for this or for any future owners looking to lift. All you need is an aftermarket UCA that will clear the coil bucket. This is a very common issue referenced to as coil bucket contact(CBC) amongst the Xterra, Frontier, and Pathfinder of similar years. Several options out there, All Dogs seem to be popular right now and SPC seems to be the go to but requires a little coil bucket trimming due to the ball joint design.


Return to “R51 Suspension and Steering”