The company name NXROCKS and they are located in Colorado. They have started with the Xterra.
The only skid plate that I don't think will work on the Pathfinder that is made for an X would be the transfer case skid.So here it is ... or they are.
Sorry didn't have time to get a picture from under the car - but that will come this week. Is not hard to realized how this will be on your truck ... As most of you will said that they look similar with Shrockworks - well, they do and probably any skids that are made profesionally to follow the frame line. However there are plenty of differences.
I was looking to get as much coverage as possible - without compromising. I can honestly say that I am extremely happy with what came out - maybe a little less with the Transfer case skid plate. There is nothing that I could of done more - but I'm dissapointed on the Xtrerra center console being so weak. I guess time will tell - or maybe I'll think of something that will reinforce that.
The pictures are not PS'ed - I took them 4-5 hours ago ....
Most of the hardware is missing from the pictures - anyway - it will come with grade 8 hardware and PLEASE note where the holes are ....
So the front skid:
The cover will have 2 flat head screws. Will be attached on 2 1/2" bolts and 2 M8 plus the 4 - M12x1.25x35 Bolts
The back side:
The ENGINE SKID:
One of the strongest skids out of all .... attached to the frame with 4 1/2" bolts plus 5 M8. They cover all what I could possible cover without interefering with LCA's - you'll understand better once I'll take the pics from under.
For who understand the phisics of this - there is no joke here :bounce: look at the welding (dang I'm getting pretty good) and the way that the bend is made ...
You can see the spacers on front ... this will prevent the skid to bend while you tighten the M8 bolts
The tranny skid .... The largest out of all - however, realy realy strong .... The two bend on the middle makes it like that .... also please note how this ATTACHES to the frame .... this wiew is actually from under
This is what yout tranny will see
Note the spacers - there are no loose spots anywhere.
T-Case .... as I said - the weakest out of all. But not because if the skid (I dare you to bend it) but because the middle console where attaches. I have no ideea if there are any complaints about this - if there are any - I'm sure someone will do something about it. Or maybe I am paranoid . ....
The Gas tank ....
On the very begining I was thinking that this is a joke .... well - I was wrong - with the right brackets this kics a$$ ... 3 days to make the stupid brackets but I am finaly happy. I covered absolutely EVERY single inch of visible gas tank plastic ...again the bottom picture will show this.
Like I said - the brackets makes all the money in this case ...
And here is an "aerial" view (you had to see me on the top of basketball
I hope you like it ... it was not easy by any means - time wise and financial ....
The website www.nxrocks.com will be up shortly - there you can purchase if you wish - at least for two weeks I will sell the complete sets only ... ( I can explain why later) ....
On teh website you will be able to calculate the shipping - this will include my UPS discount. I will ship them bare steel and you have to make them pretty
Enjoy !
Here is his web-site.
http://www.nxrocks.com/nxshop/
