It doesnt look that bad in the picture for some reason. But in person its wayy more noticable.

Moderator: volvite
from what ive seen on there site the 2'' kit sits level. but what company sells spacers for the front? 4x4parts.com said they could make them but for $165 for one!!fleurys wrote:put 300lbs of stuff in the back![]()
![]()
Seriously, the front is McPherson type strut, so there is not alot of options here.. To raise the front you need spacers since you already put stiffer springs.
If no spacers, then you need to completely remove the front suspension and build something with coilovers. Since it does not exist as an after-market option anywhere, this will cost you time and money to develop.
Putting old springs at the back will most probably do the reverse effect (lower rear vs front).
by the way, a new pathfinder of this year came from factory with a rake like this...so it's not the fault of the lift kit.