Page 1 of 2

Jerseyparts

Posted: Fri Jun 06, 2008 9:35 am
by Jerseyparts
Hi Guys, my name is Brian, and I do not have a Pathfinder.. (waits for the boos to subside)
I run www.eNissanParts.com and I am here to introduce myself to your community, and let you guys know I am here for you.
First a little history, I used to work for Nissan of Turnersville, a large auto-mall located in Turnersville NJ, I worked there for 10 years, and I slowly built a website for Nissan Accessories, this website was dedicated to Nissan Owners throughout the Nation, and we strived to have top notch Customer service. Well we did just that, becoming the number 3 On-line Nissan Parts dealer in the country, unfortunately with a Management change at the dealership, the thinking behind the website started to change, it was no longer a priority, and customers were put on the back burner.
Because of this, I left the dealership in Turnersville, and came to work for Cherry Hill Nissan, where I was assured, that my thinking was welcome and shared by other people in management.

Well that brings us to present day, we are again slowly building a website for all you Nissan Enthuasists, and we want your input,
we are running two seperate software and servers systems, and you will be seeing the second one coming on line in the near future.

But what I want to know is, what kind of accessories would you like to see on our sites?

anyway, I hope your still awake from reading this, and if there is anything I can do for you, drop me a line, I am always happy to help where I can.

Brian

Posted: Fri Jun 06, 2008 6:42 pm
by boogyman
Welcome to the board. Hopefully you can help people find the obscure part numbers we can't seem to dig up.

Re: Jerseyparts

Posted: Sat Jun 07, 2008 5:59 pm
by NVSteve
Jerseyparts wrote: But what I want to know is, what kind of accessories would you like to see on our sites?
Hi Brian,

Nissan OME parts, or 3rd party? I was trying to think of something, but there is so little out there available for the Pathfinder. A few of us are trying to figure out how to make a cargo cover from an Xterra work with the Pathfinder. The biggest question is if you can come up with part numbers for where the cover mounts, basically on both interior side panels.

Posted: Mon Jun 09, 2008 7:28 am
by Jerseyparts
Both, we are open to all accessories.

As far as the tonneau cover goes, that has been tried a few times, and the width just doesn't allow it.
I will have to do some measurements and see if we can come up with something....


B

Posted: Mon Jun 09, 2008 8:29 am
by NVSteve
Jerseyparts wrote:Both, we are open to all accessories.

As far as the tonneau cover goes, that has been tried a few times, and the width just doesn't allow it.
I will have to do some measurements and see if we can come up with something....

B
If I could get a hold of the side mounts, and if they will even fit on the PF, then I'll rig up something. Haven't met a retractable cover yet that couldn't be modified/shortened in width.

Posted: Tue Jun 10, 2008 8:51 am
by Jerseyparts
HMMM The mounts are actually part of the inner trim of the cargo area.

You would have to replace your cargo interior trim with that of an Xterra...

Posted: Tue Jun 10, 2008 9:04 am
by NVSteve
Jerseyparts wrote:HMMM The mounts are actually part of the inner trim of the cargo area.

You would have to replace your cargo interior trim with that of an Xterra...
Forget that idea then. Unless I can grab some cheap panels out of a wrecked X and dremel away. Is there anything that shows up in the system as a small part that can be attached to the sides of the Pathfinder interior? The mount points are there with plastic covers, although I have to admit I've never popped one of the covers to see what's behind. Maybe I'll have a look at lunch today.

Posted: Wed Aug 13, 2008 12:47 pm
by Cr@2y Gr33k
It's a great site for anyone who is looking for an OEM replacement part. Thanks again Brian for the great service and prices. :D

Posted: Tue Aug 19, 2008 6:30 am
by Jerseyparts
Thanks, and watch the site in the coming weeks, we will be rolling out a software change that should make Accessories a little easier to find, and a whole slew of new accessories will be added to the site.


Brian

Posted: Sat Oct 25, 2008 7:05 am
by Jerseyparts
The new software is up and running, and I am looking for opinions, and would appreciate any comments you guys could give.

www.NissanOnlineParts.com

Brian

Posted: Sat Oct 25, 2008 2:54 pm
by blink32
Straight forward. Not a lot of redundant "flash". I see some cell spacing/alignment issues in Firefox 3.0.2 and 3.0.3. IE displays fine.

Oh, and of course pictures for everything are always nice. :)

Yet another edit. Maybe a border, shading or different color for the "add to cart" buttons? This may be a selfish request but I'm pretty color blind and didn't notice that those were even buttons.

Posted: Mon Oct 27, 2008 2:42 pm
by Jerseyparts
I will work on the border for you, and Thanks for the Input.
I Really do Appreciate it!

Brian

Posted: Mon Oct 27, 2008 3:36 pm
by NVSteve
Brian,

I know we discussed this before, but could you possibly get the dimensions for the Xterra's rear cargo cover? Both width and length (fully extended)? Thanks.

Posted: Tue Oct 28, 2008 6:52 pm
by Jerseyparts
I will see if I can get the measurements tomorrow.

B

Posted: Wed Oct 29, 2008 5:46 am
by Jerseyparts
Ok, I did some measuring this morning.

The overall length of the unit is 56 1/2 inches, and including the nubs on the ends 56 3/4 inch
Now the unit can be compressed down to about 55 Inchs 55 1/2 including the mounting nubs.

I hope this helps you.