Page 1 of 1

DIY: Vehicle Badging Removal/Replacement (Video)

Posted: Mon Jul 18, 2011 6:23 am
by ProStreetDriver
How to remove/shave your vehicles emblems/badges. I have also included how to add a new emblem to a vehicle. Tools needed are a heat gun or hair dryer, dental floss or fishing line, polisher is optional, polishing compound, wax, lint free polishing cloth, brake cleaner or rubbing alcohol, ruler or string, and a fine tip marker.


http://www.youtube.com/watch?v=fF98gvfBH5g

Posted: Mon Jul 18, 2011 7:53 pm
by volvite
I am unable to watch the youtube video at work, but will on my laptop.
Question, does the rear emblem leave any holes or is it just a sticker?

I've also found that leaving your vehicle out in the sun on a hot day and dental floss works really well too. Didnt take much effort at all as the heat heated the whole vhicle and the glue that holds the emblems on was real tacky and came right off with dental floss. Thanks for the write up. I might end up doing this now to the pathfinder. I did it to my jeep.