Page 1 of 1

Scratches

Posted: Sat Oct 09, 2010 2:12 am
by RoNYC
Just wondering about how to get rid a couple of them. Not sure how to describe it but I will try my best. They are not really scratches, about half an inch on the widest part and an inch in length. It did not go through the paint, seems like the clear coat was scraped off. Is it as simple as re spraying the area with coat of clear?

Thanks

Posted: Mon Oct 11, 2010 3:18 pm
by cruzstyle
NOOOOOOOOOOOO do not spray over with new clear it will come out like crap unless u are really good at blending new and old paint. just try to buff it out. without seeing it thats all i can really tell u. rattle can clear on a factory paint job will look really bad

Posted: Mon Oct 11, 2010 4:13 pm
by RoNYC
Thanks for the reply!

Posted: Sun Oct 17, 2010 8:58 pm
by Heavens_Soldier
Definitely just try to wax and buff it out. Most of the time it clears it up or makes it faint enough that its dang hard to see.