The Nissan Path

where can I get it?
Is it really necessary?
In the last alignment service the numbers were TOO close to red...and no possible to make more adjustment...
Thanks for give me a hand on this.

Well you can either get the Nissan ones from Nissan (or online vendors) or get an aftermarket company's version.

SPC is the company I usually go for and any local parts house should have them.

Or just search for "2011 Pathfinder rear camber bolts" and click on shopping.

Sticky on Nissan kits

http://www.thenissanpath.com/viewtopic.php?t=11989

Rear suspension should already have the eccentric adjustment bolts from the factory. The camber/caster bolts from Nissan won't be any different from what you already have on your vehicle. Is the suspension stock or modified?

It seem I got it wrong and the stock eccentric rear bolts do the job ok, which is not the case for the front suspension.

Thanks to all.-

I got this info today from 4x4 Parts. Anyone familiar with it?

Can you let us know if your alignment is fixed with those thanks

Thupertrooper, I haven't order it yet looking for any feedback before that.

Mike V from 4x4Parts told me "these will give you ability to adjust your alignment by rotating sleeves in your upper a arms of rear suspension"

I haven't speak to him yet after receiving his email showing this new (?) kit.

This is the link: http://www.4x4parts.com/i-22756999-rear ... hings.html

FYI
This is it!
Message from 4x4Parts:
"You originally ordered lower a arm camber alignment kit which is the same as your stock lower a arm camber alignment kit.
From what I understand you are looking for ability to get more alignment range then what you get with your stock lower a arm camber bolts, by installing upper a arm off-set bushings you will be able to get additional alignment for rear end if you are having problems getting rear end aligned in your R51 Pathfinder."

Thank you for the info