Page 1 of 1

4x4parts hd springs

Posted: Thu Dec 24, 2015 3:44 pm
by silver x0ne
Anyone using the 4x4parts hd springs 1.75" lift? I am fighting a frustrating battle with the rear end... I upgraded suspension to 2.5 coilovers with 500lb springs in the front (hoping to do bumper soon) and radflo emulsions along with these springs in the rear... I assumed that going with the hd springs (supposedly 30% increased spring rate over stock) that I would have a more stable (not bouncy like stocm) rear end. Reality is that it is worse than it was stock. Alignment is decent but I do have a slight bit of camber out in the rear.

I'm searching for a reason to not sell the pathfinder but its making it hard.

Posted: Tue Dec 29, 2015 7:25 am
by Thupertrooper
I was planning on running those but decided on going with stock Armada rear springs with towing package do you know the extended length of the spring is?uncompressed length

Posted: Wed Feb 03, 2016 12:46 pm
by silver x0ne
I'm not sure of the length unfortunately. If I ever have it apart again I'll measure.

Posted: Wed Feb 03, 2016 2:02 pm
by Thupertrooper
If you arnt already i suggest you get the airlift 1000 airbags that helped me out alot