The Nissan Path

Posted: **Tue Mar 22, 2016 6:26 am**

I have a really bad squeaking/metal on metal grinding noise when I go over bumps or turn the wheel while the vehicle is stationary. It does not make the noise when I'm on a flat surface driving and turning the wheel. Any thoughts on what this could be?

Posted: **Tue Apr 12, 2016 6:02 am**

I believe the squeaking noise has to do with sway bar bushings. There is technical service bulletin on this NTB-10-072A.

Posted: **Fri May 13, 2016 5:01 pm**

...or steering rod bushings, just like in my case - both gone, with ticking metal noise.

Posted: **Fri May 13, 2016 6:27 pm**

Also check sway bar bushings

Posted: **Sun Nov 13, 2016 1:58 pm**

Hi,

I did not find the initial squeaking source, and it's coming louder UNDER LOAD, meaning uphill or downhill, while on straights it is quiet. I also notice slight vibration at higher speeds.
So here's updated VIDEO of how it sounds like:
https://youtu.be/MzofzQvsmRk

2 of 4 U-joints were replaced. Might U-joint make this sound?
Also I know ball joints on front and rear legs are worn out, but that's not the right sound, I guess.
It sounds like some rubber hitting the rubber on each driveshaft revolution.
Any idea?

The Nissan Path

Squeaking noise coming from driver side front tire

Squeaking noise coming from driver side front tire