The Nissan Path

I installed Moog Armada Springs and although I like the lift ~3" or more, I cant get the camber adjusted correctly (which I expected). Will this allow for proper adjustment?

https://www.4x4parts.com/i-22756999-rea ... hings.html



Thanks!

No one has anything on this?

From what I've seen on here. It's like a 50/50 with the bushings. Might be better off with the gussets that someone else had success with recently. Cheaper and most likely last twice or three times longer than the bushing solution.

It worked for me, but it was expensive, and even the machine shop I took it to had a hard time with it. Gussets are the way to go.

My 2011's rear suspension is OME medium springs with OME Nitrocharger shocks.

I did a 1 1/2 inch PRG spacer lift all around, plus the Moog heavy duty stock replacement springs in the rear. And I spoke with 4x4 parts to confirm how to install, and checked to ensure that the shop had installed them correctly.

It didn't work for me. Still couldn't get the rear alignment in spec.