Page 1 of 1
RadFlos and 4x4 parts rear springs?
Posted: Mon Sep 17, 2012 5:44 pm
by NmexMAX
Has anyone gone with the RadFlo coilovers and UCA's up front coupled with the HD 4x4 parts rear springs? From what I understand, the rear springs only provide 1.0" lift vs the claimed 2.5" buy do offer stiffer springs when loaded. I suppose I can level it out using the adjustable coilovers up front. Just wondering if anyone has this setup and how you like it if so.
Posted: Tue Sep 18, 2012 5:58 am
by doctahjones
if i did it again, i'd be tempted to do something like that. however, it's tough to beat that $440 price tag for what you get...
i got ~1.5in lift out of the rear springs, but can get the full 2in if i keep my airbags inflated at ~30psi.
Posted: Tue Sep 18, 2012 6:45 am
by NmexMAX
Still contemplating what to go with at this point.
I've already got the rear springs, now to decide on the front. And yes, the UCA/CO combo is fairly steep.
I'm wondering if I can get 295-65/18's Duratracs under there with this set-up.
Looking into going with an 18x9 with a -12mm offset.
Posted: Thu Sep 20, 2012 12:47 pm
by NmexMAX
I pulled the trigger with the Radflo 2.5 coilovers (650 # springs, because I plan on installing bumper, winch & under armor in the future) and UCA's yesterday. Decided to add the rear Radflo 2.0 shocks while I was at it.
Let's hope everything goes well and as planned, and if it doesn't, let's hope everything gets sorted out as it should.
