Page 1 of 1
Rear unit bearing torque specs
Posted: Mon Feb 24, 2020 7:31 pm
by Brett
Can I confirm rear unit bearing torque specs? I searched around and found 44 ft/lb and a replacement spec. Is the replacement really necessary? Threadlocker? Seems like a low torque spec.
Thanks!
Posted: Mon Feb 24, 2020 10:52 pm
by smj999smj
If you are talking about the four bolts that mount the wheel bearing to the knuckle, then 44 lb-ft is the torque spec. I just did all four of mine on my 06 Pathy. You can use blue thread locker on the bolts, if you want.
Posted: Tue Feb 25, 2020 12:20 pm
by Brett
Yes, those are the ones, thanks.
Much quieter now that I don't have to listen to a bearing eating itself.
Posted: Sun Mar 29, 2020 11:48 pm
by jesseperez
smj999smj wrote:If you are talking about the four bolts that mount the wheel bearing to the knuckle, then 44 lb-ft is the torque spec. I just did all four of mine on my 06 Pathy. You can use blue thread locker on the bolts, if you want.
Many thanks for that.