Stalling at start up

The Gas and Diesel Engines - VQ40De, VK56DE, YD25DDTi, V9X, Transmission, Transfer Case, Oil, Differentials, Axles, Exhaust...

Moderator: volvite

Sf49168
Posts: 21
Joined: Wed Oct 02, 2013 2:20 pm
Location: NY

Stalling at start up

Postby Sf49168 » Tue Jul 14, 2020 3:44 am

How’s it going ?

I have a 2008 SE approx 158K. Recently ( month or so ) I’ve noticed when I start the truck at 1 time , it started but never fully kicked over and stalled. I would than start and it would be fine

Just today , it did the stalling thing 3 times in a row

Any ideas what it could be ?

Thanks


User avatar
disallow
Site Admin
Posts: 2807
Joined: Wed Aug 13, 2008 9:02 am
Location: Winnipeg, Canada

Re: Stalling at start up

Postby disallow » Tue Jul 14, 2020 10:39 am

Any CEL or codes? Could be many things.

User avatar
Code Pathfinder
Posts: 131
Joined: Thu May 18, 2017 6:54 am
Location: Minnesota

Re: Stalling at start up

Postby Code Pathfinder » Tue Jul 14, 2020 10:43 am

Mine did this two weeks ago.

Ended up being a bad camshaft position sensor.

I would scan the OBD2 port to get codes or error messages

Sf49168
Posts: 21
Joined: Wed Oct 02, 2013 2:20 pm
Location: NY

Re: Stalling at start up

Postby Sf49168 » Thu Jul 16, 2020 6:05 am

No check engine light came on ... haven scanned it since no lights on but will try and see what comes up

User avatar
disallow
Site Admin
Posts: 2807
Joined: Wed Aug 13, 2008 9:02 am
Location: Winnipeg, Canada

Re: Stalling at start up

Postby disallow » Thu Jul 16, 2020 3:32 pm

Sf49168 wrote:
Thu Jul 16, 2020 6:05 am
No check engine light came on ... haven scanned it since no lights on but will try and see what comes up
Try finding a code reader that shows pending codes.


Return to “R51 Engine, Driveline and Powertrain”