P0463 but all works
Posted: Thu Jan 16, 2014 10:33 am
by Fookn4x2
I am getting the P0463 code which we all know is Fuel Level Sensor Circuit High Voltage. The funny thing is everything works fine. I haven't had any issues with the level sensor and I still don't. So could it be something other than the fuel level sensor? Thanks
Posted: Thu Jan 16, 2014 11:27 pm
by smj999smj
P0463 is when excessively high voltage is sent from the fuel level sensor to the ECM. Possible cause include:
-harness or connectors (open or shorted CAN communication line...which would also be accompanied by a "U" code)
-harness or connectors (sensor harness is open or shorted)
-combination meter
-fuel level sensor
Per TSB #NTB07-069D, it states:
IF YOU CONFIRM:
The fuel gauge is erratic, inaccurate, or inoperative.
And/Or
The MIL is "ON" with DTC P0461, P0462, or P0463 stored in Self-Diagnosis.
ACTIONS:
Replace the fuel level sending unit with the one from the Parts Information section of this bulletin.
^ Make sure to use the Clip (Sender Unit Cover) listed in the Parts Information.
Parts:
25060-ZZ00A fuel sender
17342-EA000 packing
17574-ZZ00A clip (sending unit cover)